English Deutsch

Brushcutter / 4-stroke string trimmer UMK25D Honda GX25

Brushcutter / 4-stroke string trimmer UMK25D Honda GX25
Product no.: UMK25D

340,00 EUR   19 % VAT incl.

Shipping inside Germany: 25,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)


Brushcutter / 4-stroke string trimmer UMK25D Honda GX25 Item is temporarily not available!

This trimmer is equipped with a quality Honda engine.
The motors are purchased directly from the Honda company in Japan. Thus, a low purchase price and the best quality is guaranteed.

It can be assumed that this company produces brushcutters for much of all Japanese manufacturers of brushcutters.

Thus we can offer a quality product to you at the best price-performance relation.

We buy only full shipping containers - directly from the factory.

The engine will start super easy, no matter at what position the engine is situated and furthermore a 4-stroke-Hondaengine GX25 is quieter than a 2-stroke engine.

We sell only products, which we use ourself, which we offer in our retail store and which even have been extensively tested and found to be good.

The trimmer works generally with very low vibration - because the engine reaches only 7000 rpm at the maximum speed - a 2-stroke engine has min 12000 rpm (thus, it has higher vibration).

The fuel consumption is lower than the fuel consumption of a 2-stroke engine.

The device is suitable for full professional use.

A solid steel shaft transmits the force. It is borne in the tube seven times. This speaks for the absolute quality of this product.

A padded harness, a blade for grass cutting and a double line head are included in scope of delivery. It is a 3-toothed Brush blade or another grass blade available at surcharge. All grass cutting blades are in stock.

It is also possible to use steel blades from other manufacturers - Stihl blades with a central bore of 25.4 mm also fit.

The double line head has a M8x1.25 left female thread - You can use any commercial double line trimmer head.

The brush cutter is equipped with an ergonomic handle system, that means the right side of the handhold is shorter than the left side of the handhold. So you can carry the brushcutter effortlessly and work long-term with it without cramping your arms.


Standard handle system - both handholds have the same length
(uncomfortable tiring / tense work)


Ergonomic handle system - infinitely adjustable
(ergonomically shaped, therefore easier and more comfortable)
One handle is short, the other is many times longer.



Specification UM25KD
• eco-friendly, smooth 1cylinder 4-stroke gasoline engine Honda GX25
• Rated power: 0,81 kW/1,1 PS at 7000 rpm.
• Fuel: gasoline (do not mix with oil)
• membrane-carburetor (for work at all sloping positions)
• ergonomic handle system (2-hand-handle)
• Easy Pull-System for 60 % less effort by starting
• sturdy centrifugal clutch for constant power transfer
• Driven by angular gear
• powerful and robust drive
• Hardened steel blade for tough jobs
• weight: 6.0 kg
• noise level: 114 dB
• big tap-and-go line head (Dribble head / Dribbler = by dribbling on the ground the line is refreshed automatically)



Standard equipment
• padded double harness
• Steel blade for grass cutting
• Double line head with 2,4 m line (The line is readjusted by dribbling while mowing)

The double handle is divided. Both handholds are held together with a sturdy clip. Using the included tool you can easily adjust the handholds according to your size.

The on-off switch is easily reachable without taking your hand away from the handle. This increases the operating convenience and the safety of operation.

The included 3-tooth cutting blade for grass cuts the grass with ease and produces a clean cut. The blade has the dimensions: 255 mm diameter, 2 mm thick, center hole 25.4 mm, cutting width 255 mm. It can be easily sharpened with an angle grinder.

For a heavier strain in jungle-like terrain, the thicket-knife (blade 3-star) is suitable. The blade has the dimensions: 255 mm diameter, 3 mm thick, center hole 25.4 mm, cutting width 255 mm. It can be easily sharpened with an angle grinder.
It is also possible to use steel blades from other manufacturers - Stihl blades with a central bore of 25.4 mm also fit.
A metal cover above the blade prevents that grass moves in between the blade and the gear.

This brush cutting blade is available for a surcharge.

A support/safety plate allows to have a uniform distance to the ground and this produces a clean cut appearance.

At the bottom a support is mounted.





The double line head / trimmer head is filled with a nylon line with a thickness of 2.4 mm. The line is readjusted by dribbling while mowing. The trimmer head can be take apart without tools. If the line is over, both lines have to be wound in direction of arrow. The trimmer head has a M8x1.25 left female thread and can be replaced with any equal nylon line of a commercial double line trimmer head. The cut circle is 400 mm.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Recommended products:

Double shoulder harness / strap for trimmers

Double shoulder harness / strap for trimmers

55,00 EUR (19 % VAT incl. * Shipping information)
Engine oil 0.6 liters for 4-stroke engines

Engine oil 0.6 liters for 4-stroke engines

4,97 EUR (19 % VAT incl. * Shipping information)
Replacement mowing thread diameter 2.4 mm - Price per meter

Replacement mowing thread diameter 2.4 mm - Price per meter

0,36 EUR (19 % VAT incl. * Shipping information)
Foldable edges and bark protection for brushcutters

Foldable edges and bark protection for brushcutters

99,00 EUR (19 % VAT incl. * Shipping information)
thicket-knife

thicket-knife

15,00 EUR (19 % VAT incl. * Shipping information)

Customers who bought this product also bought the following products:

Foldable edges and bark protection for brushcutters

Foldable edges and bark protection for brushcutters

99,00 EUR (19 % VAT incl. * Shipping information)
Engine oil 0.6 liters for 4-stroke engines

Engine oil 0.6 liters for 4-stroke engines

4,97 EUR (19 % VAT incl. * Shipping information)
thicket-knife

thicket-knife

15,00 EUR (19 % VAT incl. * Shipping information)
Replacement mowing thread diameter 2.4 mm - Price per meter

Replacement mowing thread diameter 2.4 mm - Price per meter

0,36 EUR (19 % VAT incl. * Shipping information)

Shopping cart   >>

You do not have any products in your shopping cart yet.

Special offers   >>

snow plow, hydraulic pusher blade PS180H for tractor small tractor

snow plow, hydraulic pusher blade PS180H for tractor small tractor
Our previous price 1.100,00 EUR
Now only 999,00 EUR
you save 9 % / 101,00 EUR

19 % VAT incl. * Shipping information

Newsletter subscription

E-mail address:

Information

Gelistet bei TestIt.de

Parse Time: 1.388s