This multifunction tool is equipped with a quality Honda engine. We are the dealership, we get provided brushcutters directly from the producer.
It can be assumed that this company produces brushcutters for much of all Japanese manufacturers of brushcutters. We picked out the biggest and best known.
The producer manufactures trimmers for well-known distributors worldwide.
Some more informations.... We are the dealership in Germany! The motors are purchased directly from the Honda company. Thus, a low purchase price and the best quality is guaranteed. Thus we can offer a quality product to you at the best price-performance relation.
We buy only full shipping containers - directly from the factory.
The engine will start super easy, no matter at what position the engine is situated and furthermore a 4-stroke-Hondaengine GX25 is quieter than a 2-stroke engine.
We sell only products, which we use ourself, which we offer in our retail store and which even have been extensively tested and found to be good.
Our UMC25 model is technically and qualitatively comparable to the Versatool UMC425E of Honda.
The multitool UMC25 can be used in many cases.
The fastener plug-fit system is very simple. You plug the device into the friction tube clasp (arrow on the locking lever) let the locking bolt into place and tighten the knurled nut to connect firmly.
standard equipment
1x trimmer attachment with Tap and Go, double trimmer head and a 3-tooth grass cutter blade
1x hedge trimmer attachment working width of 40cm, the cutting angle can be adjusted stepwise via the blade holder.
1x Branch sawing attachment, cutting length 25cm
1x Protective goggles
1x Single shoulder belt
We guarantee a serious carrying out. You have a full right of return.
Technische Daten UMC25
• eco-friendly, smooth 1cylinder 4-stroke gasoline engine Honda GX25
• max. engine power: 0,81 kW/1,1 HP at 7000 rpm.
• Fuel: gasoline (do not mix with oil)
• membrane-carburetor (for work at all sloping positions)
• Easy Pull-System for 60 % less effort by starting
• sturdy centrifugal clutch for constant power transfer
• Driven by angular gear
• powerful and robust drive
• Hardened steel blade for tough jobs
• noise level: 114 dB
• weight: 14 kg (Basic device with brushcutter attachment)
• Tap & Go (trimmer head with tip automatic)
trimmer attachment
hedge trimmer attachment
Knife blades spaced blade to blade 28mm
Branch sawing attachment
The included 3-tooth cutting blade for grass cuts the grass with ease and produces a clean cut. The blade has the dimensions: 255 mm diameter, 2 mm thick, center hole 25.4 mm, cutting width 255 mm. It can be easily sharpened with an angle grinder.
It is also possible to use steel blades from other manufacturers - Stihl blades with a central bore of 25.4 mm also fit.
A metal cover above the blade prevents that grass moves in between the blade and the gear.
A support/safety plate allows to have a uniform distance to the ground and this produces a clean cut appearance.
4-stroke Honda engine GX25
The double line head / trimmer head is filled with a nylon line with a thickness of 2.4 mm. The line is readjusted by dribbling while mowing. The trimmer head can be take apart without tools. If the line is over, both lines have to be wound in direction of arrow. The trimmer head has a M8x1.25 left male thread and can be replaced with any equal nylon line of a commercial double line trimmer head. The cut circle is 400 mm.
plug-fit system
A: locking lever B: knurled nut
Against surcharge:
Motor hoe/rotary tiller/rotovator attachment for 150,00 EUR
Working width 18cm
Extension for 45,00 Euro
