Chopper H80 coarse chopper wood chipper for tractor small tractor from 12 hp

This chopper is a top class chopper and has been produced since 2009.

It was developed solely for long chopping of the wood.

There are pieces of wood with a length of 6-13 cm. The wood is ideal for heating purposes.

The H80 is designed for low-power tractors.

The small tractor should have at least 12.0 hp and a rear three-point linkage KATI and a standard PTO with 540rpm. have clockwise rotation.

The power is transmitted from the PTO shaft directly to the knife shaft.

functionality

The power take-off drives the two knife rollers, which cut off the piece of wood, via gears that mesh permanently.

The two knife rollers do not meet, but there is a gap of 0.2 mm between the two knife edges.

We guarantee a serious transaction - you have full right of return.

Technical specifications

• Drive speed only: 540 rpm.
• Drive power tractor: from 12 HP
• Max. Capacity / capacity: 5 m³ / h
• Knife drum speed: 100 rpm.
• Number of knives: 6 pieces
• Diameter of branches in raw wood: up to max. 75 mm
• Diameter of the branches in dry wood: up to max. 65 mm
• Diameter for square timber: max. 50x50 mm
• Length of the wood chips: 60-130 mm
• Dead weight: 120 kg
• Dimensions in working position (LxWxH): 160 x 100 x 100 cm
  

Additional option

• PTO available for an extra charge

(1) 55 cm if the bolts are placed outside

ATTENTION!
Please shorten the PTO to the appropriate length.

Here are some pictures from the manufacturer:

The machines are solidly made and processed flawlessly.
   The impression is created here that material and technology are not spared.
Products are manufactured here that are designed for a long service life.