English Deutsch

All-way transporter dump truck L500BL with Japanese 6-speed gearbox lift function Crawler transporter Motorized wheelbarrow Mini dumper

All-way transporter dump truck L500BL with Japanese 6-speed gearbox lift function Crawler transporter Motorized wheelbarrow Mini dumper
Product no.: L500BL

3.100,00 EUR   19 % VAT incl.

Shipping inside Germany: 150,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)


All-way transporter dump truck L500BL with Japanese 6-speed gearbox lift function Crawler transporter Motorized wheelbarrow Mini dumper

Reinforced version with 6-speed gearbox and reinforced clutch!

This caterpillar transporter is an all-way transporter that is suitable for private use in the house, yard and garden.

We are the caterpillar transport specialists!

Tracked dumpers are used to transport bulk goods such as gravel, sand, wood or salt.

A crawler dumper can, of course, also drive up steep slopes and easily transport objects over bumps.

These track dumpers have rubber tracks and therefore have a lot of grip even on appropriately smooth, slippery and / or muddy floors.

There are many possible uses for these devices, and use in winter service is also possible.

We also offer this caterpillar transporter with a snow blade for an additional charge.

Even heavy loads can be easily transported in rough terrain.

(1) lift function; (2) Lever for tilting the tub

 

Very important: The smaller the caterpillar support area, the faster the device can tip over on sloping terrain!

This is the first mini dumper in the class with a hydraulic tipping trough.


As with all caterpillar transporters, the payload decreases on steeper terrain. Since the risk of tipping increases analogously!
- straight terrain: 500 kg payload
- Slightly sloping terrain 10-20%: 450 kg payload
- Highly sloping terrain up to 25%: 350 kg payload

We assemble and test each device before shipping - so you have a low risk.


We guarantee a serious transaction - you have full right of return.

technical specifications

• 500 kg loading capacity
• 349 kg dead weight
• 6 forward and 2 reverse gears (Japanese gear)
• Gradeability: 25 °
• 12 cm ground clearance
• 4 stroke 1-cylinder OHV Loncin engine
• Reverse start
• 6.6 kW / 9.0 hp
• 6-speed gearbox: small group: 1st gear 0.7 km / h
                                                               2nd gear 1.2 km / h
                                                               3rd gear 1.9 km / h
                                                              Reverse gear 0.9 km / h
                                   Large group: 1st gear 2.7 km / h
                                                              2nd gear 4.5 km / h
                                                              3rd gear 7.3 km / h
                                                              Reverse gear 3.5 km / h
• Steering via independent steering brakes using a hand lever
• Track contact area: 700 mm
• Track width: 180 mm
• Inner dimensions of the tipping trough: 96 x 66 x 46 cm
• Max. Length of caterpillar transporter: 180 cm
• 4 liter tank capacity
• Hydraulic tipping of the tub is standard
• automatic braking when disengaging
• automatic safety brake
• Clear dimension outside: 180 x 71 x 126 cm

(1) 6 forward and 2 reverse gears; (2) group switch

smooth-running Japanese gear

track surface 70 cm and 12 cm ground clearance

 

throttle valve for regulating the lifting speed

 

As accessories we can offer a spring-loaded snow plow 118cm clearing width and 50cm high with a strong rubber scraper for 399.00 euros or with 1m clearing width for 350.00 euros!

The snow plow can be raised and lowered using the lifting rod. If you pull the spring pin on the front of the snow plow, the snow plow can be swiveled sideways several times.


If you drive against an obstacle (e.g. curb), the snow blade will fold away to the front.

We can also offer an inexpensive snow plow with a clearing width of 100 cm and a height of 50 cm with a strong rubber scraper for 180.00 euros!

The snow blade can be swiveled to the side. However, it cannot be raised, it is rigidly screwed to the crawler. Furthermore, it does not fold away when there are obstacles.





A tour in the warehouse of our dumper demonstration models:

Our warehouse


Each of our tracked dumper is fully assembled, is set and adjusted.
The track chain is tensioned, the tension of the drive belt checked and adjusted and the speed of the motor is set. We let test-run the entire device.
Then the tracked dumper is driven on a pallet and packed with cardboard and foil. Thereby the costs are somewhat higher because the dimensions of a ready tracked dumper are larger than that of a kit, as it is case with most competitor.
Our customers can simply drive the Dumper from the pallet and use it immediately without installation and adjustment expenses.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Recommended products:

Sulky for mini dumpers

Sulky for mini dumpers

699,00 EUR (19 % VAT incl. * Shipping information)

This product is compatible with:

Timber transport body, stake design for L500/L500L

Timber transport body, stake design for L500/L500L

280,00 EUR (19 % VAT incl. * Shipping information)

Customers who bought this product also bought the following products:

Timber transport body, stake design for L500/L500L

Timber transport body, stake design for L500/L500L

280,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 0.730s