English Deutsch

Mini Loader ML300 with arm steering motor wheelbarrow

Mini Loader ML300 with arm steering motor wheelbarrow
Product no.: ML300

1.080,00 EUR   19 % VAT incl.

Shipping inside Germany: free *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up; Delivery time: 4-5 days after receipt of payment by freight forwarder

with tank steering!

Mini Loader ML300 with arm steering motor wheelbarrow Item is temporarily not available!
It represents an alternative to caterpillar transporters. Especially in the field of small species we see here a field of application. But also in the trade there are good employment possibilities.
Because of its narrow width of only 85 cm it fits through every garden gate.
Effortlessly, he will carry out his transport work on every terrain.
The tilting device is easy to operate. When the tipping device is actuated, a parking brake is activated at the same time. Tilting is only possible when the machine is at a standstill.

1-> Tank steering

When you operate the left-hand steering lever, the tipper will move to the left with your own strength. The left wheel set stands, the right wheel set drives and turns.

When you operate the right handbrake lever, the dump truck will move to the right with your own strength. The right wheel set stands, the left wheel set drives and turns.

almost 90 degress tilt angle


With us, each device is assembled and tested before shipment - so you have a lower risk.

We guarantee a serious handling - you have full return.

Technical specifications

  • 300 kg Load capacity

  • 195 kg Own weight

  • 3 forward and 1 reverse

  • Maximum speed 6,0 km/h

  • 12 cm Ground clearance

  • 4 tact 1-cylinder 6,5 PS/4,78 kW Loncin-motor

  • reversind start

  • 4-Wheel drive

  • tire size: front and rear 4.80-8

  • 1,4 liter tank content

  • Automatic braking by means of disc brake when the clutch lever is not actuated

  • Box interior dimensions (LxWxH): 92 x 60 x 40 cm


1 -> gear lever

2 -> Parking brake or locking lever for the tilting trough

1 -> Emergency swith
2 -> On/ Off
3 und 4 -> Steering brake lever


Here you can see two pictures of a customer:

A look at our open-air area:

A tour in the warehouse of our dumper demonstration models:

Our warehouse

Each of our tracked dumper is fully assembled, is set and adjusted.
The track chain is tensioned, the tension of the drive belt checked and adjusted and the speed of the motor is set. We let test-run the entire device.
Then the tracked dumper is driven on a pallet and packed with cardboard and foil. Thereby the costs are somewhat higher because the dimensions of a ready tracked dumper are larger than that of a kit, as it is case with most competitor.
Our customers can simply drive the Dumper from the pallet and use it immediately without installation and adjustment expenses.


⇒ Typing errors, misapprehensions and changes excepted.

top top
Parse Time: 0.685s