English Deutsch

Diesel engine Kubota D600 16,5PS 600ccm used

Diesel engine Kubota D600 16,5PS 600ccm used
Product no.: D600

1.099,00 EUR   16 % VAT incl.

Shipping inside Germany: 65,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up; Delivery time: 4-5 days after receipt of payment by freight forwarder


Diesel engine Kubota D600 16,5PS 600ccm used Item is temporarily not available!


Similar to pic.

Large choice of new and used diesel engines (including CHP), vegetable oil diesel engines, industrial engines, Hatz Diesel Engines, Reconditioned, rebuild used engine, Yanmar diesel engines, Kubota diesel engines, Mitsubishi diesel engines

The engines were running 300 - 700 hours and are imported directly from Japan.

Because of the low service life, these motors can be seen fully usable.

The engine is filled with oil. A new oil filter is included.

The engine is ready to install.

These are used engines which have been tested and thus were controlled (bearings, glow plugs, starter).

The engines were completely disassembled and cleaned. Defective parts are replaced.

The supplier repairs Kubota diesel engines since more than 20 years.

The engine was painted new and the oil is replenished (Please correct oil level before starting!)

All Gaskets and oil seals are reinstalled.

We guarantee a serious carrying out. You have a full right of return.

Specification

The Kubota D600 engine has the same design of crankcase dimensions like the engine D640, ie, the engines are interchangeable.
For comparison, the technical specifications of the D640 model are shown in the table below.

Model D600 comparing D640
   Engine Type    3 cylinder Diesel    3 cylinder Diesel
   capacity
   600 ccm    638 ccm
   max.power at 2600 rpm.    16,5 PS / 12,1 kW    17,6 PS / 12,9 kW
   Bore    64 x 62,2    66 x 62,2
   Starter system    Electric start 12Volt    Electric start 12Volt
   Weight    61,7 kg    61,3 kg
   Dimensions (WxDxH)    424,6 x 376,5 x 478,6 mm    424,6 x 376,5 x 478,6 mm

Following differences on the engines are possible:

Kubota has made minor technical changes depending on the request of the device producer:

short oil pan - long oil pan
Radiator neck right or left
with hydraulic pump - without Hydraulic Pump
Exhaust manifold connection horizontally or vertically
Never changed is the crankcase or the connection points / threaded bore, etc.








A new V-belt is installed.


New oil filter is installed and oil is replenished.




Each engine is test-running about 10 minutes in our workshop before shipping.

Our warehouse:




Dimensions:





Specification:



performance curves:

1 year warranty - disclaimer of warranty for all wear parts. No guarantee for CHP operation with vegetable oil.

SUPPLIERS DECLARATION for components

We hereby declare that the product is designed for mounting in or on a machine.

The machine in which the above-mentioned part is to be installed, should not be put into operation until it was found that the machine complies with the requirements of the Machinery Directive.

Any damage arising therefrom is not chargeable by Motorgeräte Fritzsch GmbH. Motorgeräte Fritzsch GmbH disclaims any liability for damages, because we have no influence on installation, use and safety of the machine.

For Diesel Engines: As none of the major manufacturers give warranty / statutory warranty rights in the use of vegetable oil for diesel engines, we hereby join in this scheme.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

This product is compatible with:

Starter for Kubota 3 cylinder engines D-series

Starter for Kubota 3 cylinder engines D-series

230,00 EUR (16 % VAT incl. * Shipping information)

Parse Time: 0.817s