English Deutsch

Gasoline engine Lifan 2 cylinder 23 HP / 17 kW two cylinder

Gasoline engine Lifan 2 cylinder 23 HP / 17 kW two cylinder
Product no.: Lifan-2V78F-3

1.150,00 EUR   16 % VAT incl.

Shipping inside Germany: 65,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up; Delivery time: 4-5 days after receipt of payment by freight forwarder


Gasoline engine Lifan 2 cylinder 23 HP / 17 kW two cylinder

The gasoline and diesel engines of all manufacturers are interchangeable in terms of crankshaft dimensions and housing flange.

The crankshaft shaft is standardized. The engine can therefore be used as an exchange engine with the same crankshaft dimension. A spare parts warehouse with all wearing parts is available.
This means that the owner of a bar mower, single-axle tractor, vibrating plate, etc. can easily change his defective or weak motor - after comparing the crankshaft and flange dimensions.

We visited many engine manufacturers in China and checked the production and quality control there. When we visited this, one of the largest manufacturers, we found that the quality control was well organized. All important components were checked again and many test stations were installed in the production cycle. During the inspection of the production and the outgoing goods warehouse, you could see that many well-known manufacturers / large distributors in Europe and the USA had already manufactured.


This engine is a bit more expensive - but the product quality is right for that.

We guarantee a serious transaction - you have full right of return.

Technical specifications:

Model

2V78F-3

   Engine Type   4-stroke 2-cylinder engine OHV air cooled
   capacity   688 ccm
   max. Power   6,6 kW/9,0 PS at 3600 rpm
   Fuel   gasoline
   Fuel tank capacity
  The tank is not included!
   Starter system   electric start 12V
   Engine Oil   API CI-4/SAE 5W40
  o. 10W40 fully synthetic
   Volume   1,4 Liter
   Weight
  46,5 kg
   Dimensions (WxDxH)
  455 x 400 x 450 mm






(1) oil cooler; (2) oil filter









(1) No. 3 means the latest version from 2020. The Euronorm V version is valid from 01.01.2020.

(2) Euro emissions standard Euro 5

We have plenty of spare parts in stock.



SUPPLIERS DECLARATION for components

We hereby declare that the product is designed for mounting in or on a machine.

The machine in which the above-mentioned part is to be installed, should not be put into operation until it was found that the machine complies with the requirements of the Machinery Directive.

Any damage arising therefrom is not chargeable by Motorgeräte Fritzsch GmbH. Motorgeräte Fritzsch GmbH disclaims any liability for damages, because we have no influence on installation, use and safety of the machine.

For Diesel Engines: As none of the major manufacturers give warranty / statutory warranty rights in the use of vegetable oil for diesel engines, we hereby join in this scheme.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top
Parse Time: 0.647s