English Deutsch

Firewood processor Woodking 30EF with electric motor and conveyor

Firewood processor Woodking 30EF with electric motor and conveyor
Product no.: 30EF

4.950,00 EUR   19 % VAT incl.

Shipping inside Germany: 400,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)

Ask for your special price!

Free of charge 2 pieces of saw chains!


Firewood processor Woodking 30EF with electric motor and conveyor

Wood warms only once – during using as fuel! Not during tilting and sawing!

This firewood processor is manufactured and sold in Scandinavia. A sophisticated product with high quality.

This machine is primarily for use by private persons who operate a heating with wood throughout the year and for use by semi-professional operators. The proportion of wood heaters in Scandinavia (in rural area) is about 80%. 

A demonstration at our house is possible after prior appointment by phone.

The Firewood processor can easily be operated by one person.

Functional principle

The powerful hydraulic pump is driven by a 7,5 kW electric motor. The pump drives the splitter and the hydraulic motor for the chain saw. If you push the saw bow down, the chainsaw comes into operation.  After the sawn log of wood falls into the splitting shaft, you use the lever by hand and the lever start the splitter immediatly.

The splitting cylinder responds automatically by a Pressure Control - it splits slower in case of very hard wood and it splits faster in case of soft wood. The wood is pressed against an only 1.5 cm strong power-saving, hardened and tempered splitting wedge.

Up to 3 m long logs can be placed on the table. A large contact surface is achieved by the roller-bearing, extended contact surface - that means long logs can not tilt. The log is moved by hand. Due to the roller-bearing contact surface it is no problem. In the case of twisted wood it can also be removed.

The length of the logs can infinitely be adjusted up to 60 cm. You only need to adjust the stop.

The splitting wedge can be moved in steps up or down with a hand lever. Depending on wood thickness you can split 1-way, 2-way, 4-way or 6-way.

This is our Easy-4 splitting cross, which is delivered as standard. The splitting machine has a split pressure of 6.5 tons. This seems not much for the layman. But in connection with the Easy-splitting cross it is entirely sufficient. Whether beech, oak, birch or spruce (whether with many or not many branches) - the machine splits 99% of wood easily.



The splitting wedge is sharpened flat steel with a thickness of 1.5 cm. Initially the wood is splitted with the vertical splitting flat bar. After the piece of wood is splitted, it is pushed to the horizontal splitting flat bar in approximately 4 cm distance, and splitted again. An absolutely power-saving design!

The Easy-6 splitting cross is also designed in this way. What is available for 300,00 Euros. (Price only valid in connection with the Firewood processor).

We guarantee a serious carrying out. You have a full right of return.

Specification

Model

Woodking 30EF

   Type of drive
   7,5 kW Electric motor engine
   Splitting power    6,5 t
   Max. cutting diameter    30 cm
   Saw chain / Sword    325" 1,5  38cm 15"
   Adjustable Cutting Length
   60 cm
   Output per hour depending on
   thickness of logs
   3 - 5 m³/hour
   Splitting speed    20cm/sec.
   Weight
   405 kg
   Dimensions (LxWxH) in mm
   at transport position
   3200 x 1000 x 2250 mm
   Hydraulic oil volume
   
   Capacity of the hydraulic pump    25 l/min. at 200 bar
   Cylinder-diameter    75 mm
   Speed valve    Standard


Here you can watch the Woodking 30BF in Action.


Total length 600 cm at the working position
200 cm contact surface from the chain to the end of support role


Total length 320 cm with folded drawbar in transport position
Total height 230 cm in transport position
Total length 200 cm with removed drawbar in the park position


Manual trigger lever for the splitting process

The splitting process is automatically triggered when pressing in the saw bow. With this lever the splitting process can be separately triggered again.


Lever to lift and lower the splitting wedge


16A plug


adjustable length stop


(1) Oil tank
(2) support leg


saw bow


hydraulic drive of the chain


Chain oil tank


Screw for tensioning the conveyor belt


hydraulic drive of the conveyor belt

 

 

 

 

 

 

 


⇒ Typing errors, misapprehensions and changes excepted.


top top
Parse Time: 0.229s