English Deutsch

Firewood processor Woodking 38BF with gasoline engine and conveyor

Firewood processor Woodking 38BF with gasoline engine and conveyor
Product no.: 38BF

3.999,00 EUR   19 % VAT incl.

Shipping inside Germany: 400,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)



Firewood processor Woodking 38BF with gasoline engine and conveyor

Wood warms only once – during using as fuel! Not during tilting and sawing!


This machine is primarily for use by private persons who operate a heating with wood throughout the year and for use by semi-professional operators. The proportion of wood heaters in Scandinavia (in rural area) is about 80%. 

The Firewood processor can easily be operated by one person.

A demonstration at our house is possible after prior appointment by phone.

Functional principle

The powerful hydraulic pump is driven by a 14PS gasoline engine. The pump drives the splitter and the hydraulic motor for the chain saw. If you push the saw bow down, the chainsaw comes into operation. After the sawn log of wood falls into the splitting shaft, you use the lever by hand and the lever start the splitter immediatly.

The splitting cylinder responds automatically by a Pressure Control - it splits slower in case of very hard wood and it splits faster in case of soft wood. The wood is pressed against an only 1.5 cm strong power-saving, hardened and tempered splitting wedge.

Up to 3 m long logs can be placed on the table. A large contact surface is achieved by the roller-bearing, extended contact surface - that means long logs can not tilt. The log is moved by hand. Due to the roller-bearing contact surface it is no problem.

The length of the logs can infinitely be adjusted up to 55 cm. You only need to adjust the stop.

The splitting wedge can be moved in steps up or down with a hand lever. Depending on wood thickness you can split 1-way, 2-way, 4-way or 6-way (6-fold split cross at extra cost).

This is our Easy-4 splitting cross, which is delivered as standard. The splitting machine has a split pressure of 7 tons. This seems not much for the layman. But in connection with the Easy-splitting cross it is entirely sufficient. Whether beech, oak, birch or spruce (whether with many or not many branches) - the machine splits 99% of wood easily.

(1) 4-way split cross
(2) large gap channel
(3) Manual adjustment of the splitting cross (lifting and lowering)

 The 4er splitting wedge is sharpened flat steel with a thickness of 1.5 cm. In one operation the wood is splitted with the vertical splitting flat bar. After the piece of wood is splitted, it is pushed to the horizontal splitting flat bar in approximately 4 cm distance, and splitted again. An absolutely power-saving design!

The 6er Easy-Spaltkreuz is optionally available for an additional charge.

We guarantee a serious carrying out. You have a full right of return.

Specification

Model

Woodking 38BF

   Type of drive
   14 HP gasoline Kohler engine with electric start
   Splitting power    7 t
   Max. cutting diameter    38 cm
   Saw chain / Sword    325" 64 TG 1,5
   Adjustable Cutting Length
   55 cm
   Output per hour depending on
   thickness of logs
   3 - 5 m³/hour
   Splitting speed    20cm/sec.
   Weight with conveyor    410 kg
   Dimensions (LxWxH) in mm
   at transport position
   3800 x 1000 x 2500 mm
   Capacity of the hydraulic pump    25 l/min. at 200 bar
   Cylinder-diameter    80 mm
   Speed valve    Standard

  


Total length 670 cm at the working position

Total length of the removable drawbar 135cm
87cm contact surface from roll to roll


Manual trigger lever for the splitting process

 
(1) Manual adjustment of the splitting cross (lifting and lowering)
(2) saw bow

 

20 cm wide conveyor belt, 3.20 m conveyor belt

Conveyor belt increase
(so that the split pieces of wood can not fall off anymore)


14 hp Kohler petrol engine
Electric start and manual start combined, but without battery and wiring.

 
Chain oil tank

 
Tires 135 / 70R12 

 hydraulic drive of the conveyor belt

 
By means of a winch, the conveyor belt can be easily folded. 


clear width 100cm
about 45cm from towbar to the floor

Additional option:

  • Feed belt 90 cm long with control valve + hose set for 550 €

 


⇒ Typing errors, misapprehensions and changes excepted.


top top
Parse Time: 0.283s