English Deutsch

Firewood processor Woodking 38EF with electric motor and conveyor

Firewood processor Woodking 38EF with electric motor and conveyor
Product no.: 38EF

3.950,00 EUR   19 % VAT incl.

Shipping inside Germany: 400,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)


Firewood processor Woodking 38EF with electric motor and conveyor

Wood warms only once – during using as fuel! Not during tilting and sawing!

This machine is primarily for use by private persons who operate a heating with wood throughout the year and for use by semi-professional operators. The proportion of wood heaters in Scandinavia (in rural area) is about 80%. 

A demonstration at our house is possible after prior appointment by phone.

The Firewood processor can easily be operated by one person.

Functional principle

The powerful hydraulic pump is driven by a 7,5 kW electric motor. The pump drives the splitter and the hydraulic motor for the chain saw. If you push the saw bow down, the chainsaw comes into operation.  After the sawn log of wood falls into the splitting shaft, you use the lever by hand and the lever start the splitter immediatly.

The splitting cylinder responds automatically by a Pressure Control - it splits slower in case of very hard wood and it splits faster in case of soft wood. The wood is pressed against an only 1.5 cm strong power-saving, hardened and tempered splitting wedge.

Up to 3 m long logs can be placed on the table. A large contact surface is achieved by the roller-bearing, extended contact surface - that means long logs can not tilt. The log is moved by hand. Due to the roller-bearing contact surface it is no problem. In the case of twisted wood it can also be removed.

The length of the logs can infinitely be adjusted up to 55 cm. You only need to adjust the stop.

The splitting wedge can be moved in steps up or down with a hand lever. Depending on wood thickness you can split 1-way, 2-way, 4-way or 6-way (6-fold split cross at extra cost).

This is our Easy-4 splitting cross, which is delivered as standard. The splitting machine has a split pressure of 7 tons. This seems not much for the layman. But in connection with the Easy-splitting cross it is entirely sufficient. Whether beech, oak, birch or spruce (whether with many or not many branches) - the machine splits 99% of wood easily.

The 4er splitting wedge is sharpened flat steel with a thickness of 1.5 cm. In one operation the wood is splitted with the vertical splitting flat bar. After the piece of wood is splitted, it is pushed to the horizontal splitting flat bar in approximately 4 cm distance, and splitted again. An absolutely power-saving design!


The Easy-6 splitting cross is also designed in this way. The 6-splitting cross is optionally available for an additional charge.

We guarantee a serious carrying out. You have a full right of return.

Specification

Model

Woodking 38EF

   Type of drive
   7,5 kW Electric motor engine
   Splitting power    7 t
   Max. cutting diameter    38 cm
   Saw chain / Sword    325" 1,5  38 cm 15"
   Adjustable Cutting Length
   55 cm
   Output per hour depending on
   thickness of logs
   3 - 5 m³/hour
   Splitting speed    20 cm/sec.
   Weight
   405 kg
   Dimensions (LxWxH) in mm
   at transport position
   3800 x 1000 x 2500 mm
   Total length with removed drawbar in the park position    200 cm
   Capacity of the hydraulic pump    25 l/min. at 200 bar
   Cylinder-diameter    75 mm
   Speed valve    Standard


Total length 600 cm at the working position
200 cm contact surface from the chain to the end of support role / Tires: 135/70R12


Manual trigger lever for the splitting process

The splitting process is automatically triggered when pressing in the saw bow. With this lever the splitting process can be separately triggered again.


Lever to lift and lower the splitting wedge


16A plug


adjustable length stop


(1) Oil tank
(2) support leg


saw bow


hydraulic drive of the chain


Chain oil tank

20 cm wide conveyor belt, 3.20 m conveyor belt


Screw for tensioning the conveyor belt

Conveyor belt increase
(so that the split pieces of wood can not fall off anymore)


hydraulic drive of the conveyor belt

Additional option:

  • Feed belt 90 cm long with control valve + hose set for 550 €

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Shopping cart   >>

You do not have any products in your shopping cart yet.

Special offers   >>

Heated tractor cab for Yanmar GK200

Heated tractor cab for Yanmar GK200
Our previous price 3.800,00 EUR
Now only 2.600,00 EUR
you save 32 % / 1.200,00 EUR

19 % VAT incl. * Shipping information

Newsletter subscription

E-mail address:

Last viewed:

Information

Gelistet bei TestIt.de

Parse Time: 0.306s