English Deutsch

Firewood processor Woodking 40BF with gasoline engine and conveyor

Firewood processor Woodking 40BF with gasoline engine and conveyor
Product no.: 40BF

5.100,00 EUR   19 % VAT incl.

Shipping inside Germany: 400,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)

Firewood processor Woodking 40BF with gasoline engine and conveyor

Wood only warms once more - while burning !!! No more cutting and sawing.

This machine is mainly bought by private customers, who operate a year-round heating with wood, and used by semi-professional operators. The proportion of wood heating in Scandinavia (in rural areas) is around 80%.

It can be easily operated by one person.

Also a demonstration in our house is possible after previous telephone arrangement.


The 13 hp petrol engine drives 2 heavily dimensioned hydraulic pumps. This pump drives the splitter and the hydraulic motor for the chain saw. If you press the saw bow down, then the chainsaw comes into operation. After the cut piece of wood has fallen into the slotted shaft, the sawbolt must be pressed in by hand to trigger the splitting process.

The second pump drives the splitting cylinder and the intake belt. The splitting cylinder reacts automatically via a pressure control (with very hard wood it splits more slowly and with soft wood it splits faster). The wood is pressed against a 1.5 cm thick tempered power-saving splitting wedge.

Up to 3 m long logs can be placed on the table. The feeder belt is 90 cm long and thus the log can easily be pulled into the machine.

(1) safety supporter for the trunk; (2) Safety stop lever for the splitting cylinder

Technische Daten


Woodking 40BF

   Drive    13 hp petrol engine
   Splitting power    12 t Max
   Cutting diameter    40 cm
   Saw Chain / Sword    325 "76 TG 1.5; 45's Sword
   adjustable cutting length    50 cm
   Achievement according to stem strength    3 - 5 RM / hour
   Splitting speed    20 cm / sec.
   Weight with conveyor
   520 kg
   Dimensions (LxWxH) at transport position    4,10 m x 1,20 m x 2,20 m
   Capacity of the hydraulic pump     25 l / min. at 200 bar
   Cylinder diameter     80 mm
   High speed valve     standard

(1) Winch for conveyor belt (2) Manual adjustment of the splitting cross


25 cm wide conveyor belt, 3.20 m conveyor belt

13 hp petrol engine


Conveyor increase
(so that the splintered pieces of wood can not fall off anymore)


Tires 135 / 70R12

hydraulic drive of the conveyor belt

hydraulic drive of the conveyor belt

The 6 and 4 split rungs are included in the standard scope of delivery.


⇒ Typing errors, misapprehensions and changes excepted.

top top
Parse Time: 1.367s