Wood now only warms up once - when burning !!! No longer when splitting and sawing.
functionality
The automatic sawing machine is driven by a PTO.
The machine is designed as standard for the rear three-point linkage KATI.
KATII is also possible by screwing longer adapter bolts into the rear arms.
The PTO drives 2 large hydraulic pumps.
A pump drives the splitting cylinder and the feed belt.
The other pump drives the chainsaw and the conveyor belt so that the splitting machine is operated completely hydraulically.
The riving knife is operated by hand in 9 different positions.
The conveyor belt is foldable and can easily be raised and lowered with a cable winch.
One person lowers the folded conveyor belt onto the floor using a cable winch, then opens the front conveyor belt and can thus bring the complete conveyor belt to the desired height.
A standard PTO is included in the standard scope of delivery.
Trunks up to 4 m long can be placed on the table. The infeed belt is 180 cm long and the log can be easily pulled into the machine.
Important for her:
The automatic saw splitting machine is completely assembled, adjusted and is tested by us.
You have no risk.
It would take a layperson about a day to screw the machine together - but how should he implement the setting?
Specification
| Model |
Woodking 410Z
|
Type of drive
|
PTO 540 rpm |
| Splitting power |
12 t |
| Max. cutting diameter |
according to manufacturer up to 40 cm
|
| Saw chain / Sword |
325 "1.5 / 45cm 76 drive links |
Adjustable Cutting Length
|
up to 50 cm with stop
|
Output per hour depending on
thickness of logs
|
3 - 5 m³/hour |
| Splitting speed |
13.75 cm / sec. |
| Weight with conveyor |
520 kg |
Dimensions (L x W x H) in cm
at transport position |
290x140x220cm |
| Oil flow |
20 l
|
| Cylinder diameter |
90 mm
|
| Power requirement of the tractor |
at least 20 hp |
| Working speed of the splitting cylinder |
13,75 cm/s |
| Return speed |
18,33 cm/s |
| capacity |
5-8 m³/pro Stunde |
hydraulic control block for tape feed and drive log lifter or support table
(1) Safety hold-down device (2) Infeed conveyor completely assembled with control valve
Adjustment or tensioning of the conveyor belt
25 cm wide conveyor belt, 3.20 m long conveyor belt
Conveyor belt increase
Forklift bags (standard)
12V connection for the electrical control of the log lifter
The 6-way splitting cross is included in the standard scope of delivery.
- Log lifter for automatic log splitter for 1399 € (Item is temporarily not available!)
The log lifter can be connected to all saw splitters, firewood splitters of the Woodking series.
An additional control valve is included in the scope of delivery of the log lifter.
Up to max. Trunks 4 m long can be lifted with this log lifter.
A hydraulic feed roller transports the log into the feed channel.
The feed belt and the hydraulic feed roller of the log lifter are connected in series and are operated by means of a control lever.
- log support table HZB3000HQ wood support table feed table longitudinal and cross conveyor for Woodking automatic splitters for 1550.00 euros
The wood for loading the saw splitting machine can be conveniently placed on the frame using a forklift or grab arm.
The trunk and the sawing machine are transported by means of a hydraulically driven star wheel roller / spiked roller - this is the longitudinal conveyance.
This means that the spiked roller and the standard feed belt of the automatic sawing machine are connected in series.
The cross-conveyance takes place via 2 roller chains.
The chains are driven hydraulically.
At the end of the chain, 4 log drivers are attached to a shaft, which let the log fall into the longitudinal conveyor.
Several holes are drilled in the supports, so the height and width of the support table can be adjusted depending on the hole pattern.
The two plastic support rollers and the star wheel roller are included.
Here you can see the splitter in a test run. In the videos, the saw splitter splits old beech wood brought by the customer.
