Wood now only warms up once - when burning !!! No longer when splitting and sawing.
This machine is mainly purchased by private customers who operate heating all year round with wood, as well as by semi-professional operators. The proportion of wood heating in Scandinavia (in rural areas) is around 80%.
It can be easily operated by one person.
A demonstration in our house is also possible after prior arrangement by telephone.
functionality
The 15 HP petrol engine drives 1 large hydraulic pump. This pump drives the splitter and the hydraulic motor for the chainsaw. If you push the saw bracket down, the chain saw will start to work. After the cut piece of wood has fallen into the splitting shaft, the saw bow must be pressed in manually to trigger the splitting process.
The hydraulic pump drives the discharge belt and the intake belt. The splitting cylinder reacts automatically via a pressure control (with very hard wood it splits more slowly and with soft wood it splits faster). The wood is pressed against a 1.5 cm thick, energy-saving splitting wedge.
Trunks up to 4 m long can be placed on the table. The infeed belt is 180 cm long and the log can be easily pulled into the machine.
Important for her:
The automatic saw splitting machine is completely assembled, adjusted and is tested by us.
You have no risk.
It would take a layperson about a day to screw the machine together - but how should he implement the setting?
(1) safety hold-down for the trunk; (2) Safety stop lever for the splitting cylinder
Technical specifications
| Model |
Woodking 40EF
|
| Power unit |
7.5 kW electric motor 380V
|
| splitting force |
12 t |
| Max. Section diameter |
40 cm |
| Saw chain / sword |
325 "76 TG 1.5; 45's Sword
|
| adjustable cutting length |
50 cm |
| Performance according to the size of the trunk |
3 - 5 RM / hour |
| splitting speed |
20 cm / sec. |
| Weight with conveyor |
520 kg |
Dimensions (LxWxH)
at transport position |
4,10 m x 1,20 m x 2,20 m
|
| Liter capacity of the hydraulic pump |
25 l / min. at 200 bar |
| Cylinder diameter |
80 mm |
| High-speed valve |
default |
(1) Winch for conveyor belt (2) Manual adjustment of the splitting cross
25 cm wide conveyor belt, 3.20 m long conveyor belt
7.5 kW electric motor
Control box with 16 A power plug
Conveyor belt increase
(so that the split pieces of wood can no longer fall off)
Tires 135 / 70R12
hydraulic drive of the conveyor belt
hydraulic drive of the infeed belt
Connection for lifting table and support table (standard)
(1) Push button switch for switching on the feed belt
The 6 and 4-way splitting cross are included in the standard scope of delivery.
- PTO set for 40EF 750,00 euros
The PTO pump can be attached to any tractor at 540rpm clockwise.
The hose package can be coupled with bayonet locks.
The standard PTO is not included in the scope of delivery but can be purchased for a surcharge of 99.00 euros.
- Log lifter for automatic log splitter for 1399 €
The log lifter can be connected to all saw splitters, firewood splitters of the Woodking series.
An additional control valve is included in the scope of delivery of the log lifter.
Up to max. Trunks 4 m long can be lifted with this log lifter.
A hydraulic feed roller transports the log into the feed channel.
The feed belt and the hydraulic feed roller of the log lifter are connected in series and are operated by means of a control lever.
- Conversion to street legal 25 km / h for 580 euros
We equip the splitting machine with the corresponding STVZO lighting device.
The acceptance is carried out by DEKRA.
We will send you the DEKRA report afterwards by registered mail.
The Woodking 33 splitter can be seen on the two previous photos.
This is the current light bar.
