English Deutsch

Splitting machine saw splitter Woodking 33BF sawing machine Firewood automat with gasoline engine conveyor belt and feeder belt

Splitting machine saw splitter Woodking 33BF sawing machine Firewood automat with gasoline engine conveyor belt and feeder belt
Product no.: 33BF+EB

4.900,00 EUR   19 % VAT incl.

Shipping inside Germany: 400,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up; Delivery time: 4-5 days after receipt of payment by freight forwarder

2 years warranty + 1 year MGF parts warranty!

Splitting machine saw splitter Woodking 33BF sawing machine Firewood automat with gasoline engine conveyor belt and feeder belt Item is temporarily not available!

Wood only warms once more - while burning !!! No more cutting and sawing.

This machine is mainly bought by private customers, who operate a year-round heating with wood, and used by semi-professional operators. The proportion of wood heating in rural areas is around 80%.

We sell saw blades since 2006 !!!

Also a demonstration in our house is possible after previous telephone arrangement.

It can be easily operated by one person.


The 13 hp petrol engine drives a heavily dimensioned hydraulic pump. This pump drives the splitter and the hydraulic motor for the chain saw. Another hydraulic pump drives the conveyor belt and the feeder belt. If you press the saw bow down, then the chainsaw comes into operation. After the cut piece of wood has fallen into the slotted shaft, the sawbolt must be pressed in by hand to trigger the splitting process.

The splitting cylinder reacts automatically via a pressure control (with very hard wood it splits more slowly and with soft wood it splits faster). The wood is pressed against a 1.5 cm thick tempered power-saving splitting wedge.

Up to 3 m long logs can be placed on the table. A high contact surface is achieved by the roller-bearing, extended support surface, this means long logs can not tip over. The trunk is pulled in with the hydraulic intake belt. The hydraulic intake belt can be moved back and forth, for example, when the log is jammed because it is crooked and has branches, etc.

The length of the logs can be infinitely adjusted up to 55 cm. You only need to adjust the stop accordingly.

The riving knife can be pushed down or up in steps by means of a hand lever. Thus, depending on the wood thickness, you can split 1-fold, 2-fold, 4-fold or 6-fold (6-fold split cross at extra cost).

Here you see our 4-splitting cross which is delivered as standard. The splitting machine has a nip pressure of 7 tons. This seems to the layman very little, but in connection with the Easy-Spaltkreuz is completely sufficient. Whether beech, oak, birch or spruce (with many or a few branches) - 99% of the machine splits the wood effortlessly.

The 4-cross wedge is beveled flat steel with a thickness of 1.5 cm. In one process, the wood is split with the vertical split flat iron. After the piece of wood is cut in half, it is pressed to the approximately 4 cm distant horizontal flat bar gap and thus halved again. An absolutely power-saving design, since the nip pressure is always concentrated on one point!


We guarantee a serious transaction - you have full right of return.

Technical specifications


Woodking 33BF

Power unit   13 hp petrol engine
splitting force    7 t
Max. Section diameter    33 cm
Saw chain / sword    325 "1.5 38 cm 15" 64T
adjustable cutting length    55 cm
Performance according to the size of the trunk    3 - 5 RM / hour
 splitting speed    20 cm / sec.
Weight with conveyor    450 kg
Dimensions (LxWxH) in cm
at transport position
   410 x 110 x 240cm
Total length with subtracted drawbar in parking position     2,80 m
Liter capacity of the hydraulic pump    approx. 25 l / min. at 200 bar
Cylinder diameter    75 mm
High-speed valve    default

Total length 670 cm at working position
200 cm contact surface from the chain saw to the end of the support roller
Tires: 135/70 R12

Manual release lever for the splitting process

The splitting process is triggered automatically when the saw blade is pressed. With this lever, the splitting process can be extra triggered or stopped again.

Lever for raising and lowering the splitting cross

adjustable longitudinal stop

(1) oil tank
(2) forklift bags

Forklift pockets for better transport of the saw

These forklift bags can also be unscrewed if there is no need for it.


Hydraulic oil filter

Chain oil tank

20 cm wide conveyor belt, 3.20 m conveyor belt

Threaded spindle for tensioning the conveyor belt rubber


Conveyor increase

(so that the splintered pieces of wood can not fall off anymore)

Clear external width


  • Log lifter for automatic log splitter for 1599 € (Item is temporarily not available!)

The log lifter can be connected to all saw splitters, firewood splitters of the Woodking series.

An additional control valve is included in the scope of delivery of the log lifter.

Up to max. trunks 4 m long can be lifted with this log lifter.

A hydraulic feed roller transports the log into the feed channel.

The feed belt and the hydraulic feed roller of the log lifter are connected in series and are operated by means of a control lever.

  • Log support table HZB3000HQ Wood support table, feed table, longitudinal and cross conveyor for Woodking splitting machines for 1699.00 euros (Item is temporarily not available!)

The wood for equipping the saw-splitting machine can be conveniently placed on the frame using a forklift or gripping arm.

A hydraulically driven star wheel roller / spiked roller is used to transport the log to the automatic saw-splitter - this is the longitudinal conveyor.

This means that the spiked roller and the standard feed belt of the automatic saw splitter are connected together in series.

Cross conveying takes place via 2 roller chains.

The chains are driven hydraulically.

At the end of the chain there are 4 log drivers attached to a shaft which let the log fall into the longitudinal conveyor.

Several holes are drilled in the supports so that the support table can be adjusted in height or width depending on the hole pattern.

The two plastic support rollers and the star wheel roller are included in the scope of delivery.

  • Conversion to street legal 25 km / h for 580 euros

We equip the splitting machine with the corresponding STVZO lighting device.

The acceptance is carried out by DEKRA.

We will send you the DEKRA report afterwards by registered mail.

Please dismantle the forklift pockets beforehand!

This is the current light bar.

Due to the high quality you have 2 years warranty and 1 year additional MGF warranty for private use.
MGF / Motorgeräte Fritzsch Warranty: Includes the free provision of spare parts upon detection of a material defect in the 3rd year, excluded from the MGF warranty are wearing parts, the remuneration of labor and other expenses.


⇒ Typing errors, misapprehensions and changes excepted.

top top

Shopping cart   >>

You do not have any products in your shopping cart yet.

Special offers   >>

Heated tractor cab for Yanmar GK160

Heated tractor cab for Yanmar GK160
Our previous price 3.800,00 EUR
Now only 2.600,00 EUR
you save 32 % / 1.200,00 EUR

19 % VAT incl. * Shipping information

Newsletter subscription

E-mail address:

Last viewed:


Gelistet bei TestIt.de

Parse Time: 0.676s