Wood only warms once more - while burning !!! No more cutting and sawing.
This machine is mainly bought by private customers, who operate a year-round heating with wood, and used by semi-professional operators. The proportion of wood heating in rural areas is around 80%.
We sell saw blades since 2006 !!!
Also a demonstration in our house is possible after previous telephone arrangement.
It can be easily operated by one person.functionality
The 7.5 kW electric motor drives a heavily dimensioned hydraulic pump. This pump drives the splitter and the hydraulic motor for the chain saw. Another hydraulic pump drives the conveyor belt and the feeder belt. If you press the saw bow down, then the chainsaw comes into operation. After the cut piece of wood has fallen into the slotted shaft, the sawbolt must be pressed in by hand to trigger the splitting process.
The splitting cylinder reacts automatically via a pressure control (with very hard wood it splits more slowly and with soft wood it splits faster). The wood is pressed against a 1.5 cm thick tempered power-saving splitting wedge.
Up to 3 m long logs can be placed on the table. A high contact surface is achieved by the roller-bearing, extended support surface, this means long logs can not tip over. The trunk is pulled in with the hydraulic intake belt. The hydraulic intake belt can be moved back and forth, for example, when the log is jammed because it is crooked and has branches, etc.
The length of the logs can be infinitely adjusted up to 55 cm. You only need to adjust the stop accordingly.
The riving knife can be pushed down or up in steps by means of a hand lever. Thus, depending on the wood thickness, you can split 1-fold, 2-fold, 4-fold or 6-fold.
Here you see our 4-splitting cross which is delivered as standard. The splitting machine has a nip pressure of 7 tons. This seems to the layman very little, but in connection with the Easy-Spaltkreuz is completely sufficient. Whether beech, oak, birch or spruce (with many or a few branches) - 99% of the machine splits the wood effortlessly.
The 4-part splitting cross is ground flat steel with a thickness of 1.5 cm. In one process, the wood is split with the vertical split flat iron. After the piece of wood is cut in half, it is pressed against the approximately 4 cm distant horizontal split flat iron and thus halved again. An absolutely power-saving design, since the nip pressure is always concentrated on one point!
The 6er Easy splitting cross is constructed in the same way. The 6-way splitting cross is included in the price as standard.
We guarantee a serious transaction - you have full right of return.
Technical specifications
| Model |
Woodking 33EF
|
| Power unit |
7.5 kW electric motor |
| splitting force |
7 t |
| Max. Section diameter |
33 cm |
| Saw chain / sword |
325 "1.5 38 cm 15" 64T
|
| adjustable cutting length |
55 cm |
| Performance according to the size of the trunk |
3 - 5 RM / hour |
| splitting speed |
20 cm / sec. |
| Weight with conveyor |
450 kg |
Dimensions (LxWxH) in cm
at transport position |
410x110x240cm |
| Total length with subtracted drawbar in parking position |
2,80 m |
| Liter capacity of the hydraulic pump |
approx. 25 l / min. at 200 bar |
| Cylinder diameter |
75 mm |
| High-speed valve |
default |
Total length 670 cm at working position
200 cm contact surface from the chain saw to the end of the support roller
Tires: 135/70 R12
Manual release lever for the splitting process
The splitting process is triggered automatically when the saw blade is pressed. With this lever, the splitting process can be extra triggered or stopped again.
Lever for raising and lowering the splitting cross
16A power plug
adjustable longitudinal stop
(1) oil tank
(2) Support foot
sawframe
Hydraulic oil filter
Chain oil tank
20 cm wide conveyor belt, 3.20 m conveyor belt
Threaded spindle for tensioning the conveyor belt rubber
Conveyor increase
(so that the splintered pieces of wood can not fall off anymore)
Clear external width
Forklift pockets for better transport of the saw
These forklift bags can also be unscrewed if there is no need for it.
- PTO set for 33EF 750,00 euros
The PTO pump can be attached to any tractor at 540rpm clockwise.
The hose package can be coupled with bayonet locks.
The standard PTO is not included in the scope of delivery but can be purchased for a surcharge of 99.00 euros.
- Log lifter for automatic log splitter for 1399 € (Item is temporarily not available!)
The log lifter can be connected to all saw splitters, firewood splitters of the Woodking series.
An additional control valve is included in the scope of delivery of the log lifter.
Up to max. trunks 4 m long can be lifted with this log lifter.
A hydraulic feed roller transports the log into the feed channel.
The feed belt and the hydraulic feed roller of the log lifter are connected in series and are operated by means of a control lever.
- log support table HZB3000HQ wood support table feed table longitudinal and cross conveyor for Woodking automatic splitters for 1550.00 euros
The wood for loading the saw splitting machine can be conveniently placed on the frame using a forklift or grab arm.
The trunk and the sawing machine are transported by means of a hydraulically driven star wheel roller / spiked roller - this is the longitudinal conveyance.
This means that the spiked roller and the standard feed belt of the automatic sawing machine are connected in series.
The cross-conveyance takes place via 2 roller chains.
The chains are driven hydraulically.
At the end of the chain, 4 log drivers are attached to a shaft, which let the log fall into the longitudinal conveyor.
Several holes are drilled in the supports, so the height and width of the support table can be adjusted depending on the hole pattern.
The two plastic support rollers and the star wheel roller are included.
- Conversion to street legal 25 km / h for 580 euros
We equip the splitting machine with the corresponding STVZO lighting device.
The acceptance is carried out by DEKRA.
We will send you the DEKRA report afterwards by registered mail.
Please dismantle the forklift pockets beforehand!
This is the current light bar.
