Fork carrier / pallet fork loader with timber gripper
for mounting on tractors with front loader
Important!
When ordering, please always specify whether your front loader has a parallel guide or not. Furthermore, we need the measurement of the width of your front loader (measured in the middle of the weld seam).
with parallel guide
without parallel guide
This pallet fork with timber gripper, also called front loader timber gripper can be attached to each of our offered front loaders. The adapters only fit onto our front loaders. For customers who want to install the front loader timber gripper itself to a different model of front loaders, delivery is without adapter, the suitable adapter for a house foreign front loaderyou must get individually.
The wooden gripper is screwed to the back of the fork. The wooden gripper nose can be unscrewed within a short time and thus you have a full pallets fork.
The pallet fork is specially designed for front loader work. The front loader timber gripper is built solid.
The maximum load capacity of the pallet fork is 1000kg according to the manufacturer. Due to the short construction of the tractor, we limit the carrying capacity of the pallet fork to 150kg, so stability is always guaranteed.
You can increase stability and loading capacity due to mounting rear weights. However, safety is paramount duty.
This timber gripper can lift and transport 1-2 logs easily, always in compliance with payload, stability, etc..
We guarantee a serious carrying out. You have a full right of return.
additional option
- control valve + hoses for the operation of the log grapple for 820.00 euros
Specifications
- Total weight: 140 kg
- Fork length: 84 mm
- Length of fork carriage: 82 mm
- Material thickness: 100 x 25 mm
- Safety stop for the forks
the wooden gripper is screwed to the back of the fork
max. fork width 82cm
