flail mulcher/flail mower SLM115
with freewheel
Including 1 bottle of gear oil + all lubrication points are pre-greased!
Attention! Please fill up with oil before use!
We sell this unit since 2005 and order from our Italian distributors always full truck loads, therefore our top price at top quality.
The small tractor should have a rear three-point hitch and KATI, a standard PTO 1 3/8 with 540rpm.
This flail mower is suitable due to its light weight for tractors from 15 PS. At high grass it is safer to go with the 1st gear and a small group, then a small tractor is not overloaded.
The flail shaft is driven via two belts, wherein the tensioning device is easy to grasp and adjust.
At the front of mulcher prevent galvanically coated pendulum lamellae the penetration of stones and other objects, so you have the security against stone impact.
The device conforms to the applicable safety standards and is CE - certified.
The mulcher is equipped with freewheel gear. The PTO shaft is included as standard.
The flail mower is equipped with hardened Y-knives, which are staggered around the shaft. The blades have a long service life and can be easily sharpened with an angle grinder.
The bracket and the parking support are included as standard in the package.
The rear roller is equipped with a wiper, and thus self-cleaning of the entire length.
The steel housing is outside 4 mm thick. The inner part is made of 3 mm sheet steel.
The stone guard is fitted front and rear.
The cutting height is easily adjustable in 5 steps.
We guarantee a serious carrying out. You have a full right of return.
Specification
• 115 cm working width
• Drive speed 540 rpm.
• gearbox with freewheel
• 42 hardened Y-flail blades
• Stone guard, front and rear
• Housing made of 4 mm steel plate
• for tractors from 15 hp
• bracket and parking support as standard
• Weight approx 190 kg
The flail mower can be attached 10cm displaced when displacing the holding triangles according to the tractor.
Rear roller lubricateable
Double V-belt drive from the gearbox to the blade shaft
Flail shaft fully lubricateable
Slip-skid adjustable, rear roller adjustable 5x
Triangle holder left bolted, displacement 10cm
Triangle holder rigth bolted, displacement 10cm
Bolts (22mm diameter) outside displaced
ATTENTION!
Please shorten the PTO shaft to the appropriate length!
Video:
With manual including parts list!
Directly available in our warehouse! All spare parts are also in stock!
