English Deutsch

Log splitter firewood splitter Woodking 20T-ZE with electric motor and PTO drive

Log splitter firewood splitter Woodking 20T-ZE with electric motor and PTO drive
Product no.: 20T-ZE

1.680,00 EUR   19 % VAT incl.

Shipping inside Germany: 95,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)

Log splitter firewood splitter Woodking 20T-ZE with electric motor and PTO drive Item is temporarily not available!

Since the market is moving towards larger Tonagen, here we have a robust 20 ton log splitter on offer.

The splitting wedge guide is made of brass, not plastic.

The foot is a complete steel plate.

The two-stage professional hydraulic pump brings the full splitting pressure as soon as splitting wedge meets resistance.

Very interesting is the stroke limiter for short wood. You can also limit the feed and set the return.

This log splitter can be attached to KatI or KATII.

Tractors from 20 PS can operate this splitter. However, one should note the weight ratio tractor to wood splitter (net weight of 310 kg). Therefore tractors with a low weight should be equipped with a front loader or front weights so that the tractor does not tilt when lifting the log splitter.

The PTO shaft is not included.

A short table for wood is available for 199.00 Euros and a 4x cross wedge for 99,00 Euros.



  • max. splitting force: 20 t
  • Splitting length: 105 cm
  • Cylinder stroke: 97 cm
  • max. Splitting diameter: 50 cm
  • Electric motor 400V / 5,5 kW
  • Rear three-point linkage KAT1 - 75cm center-center of lower link
  • Forward speed: 8 cm/s
  • Return speed: 12 cm/s
  • Hydraulic tank: 21 Liter
  • Hydraulic pressure: 240 bar
  • Dimensional extended (HxWxD): 250 x 75 x 115 cm
  • Dimension retracted (HxWxD): 190 x 75 x 115 cm
  • Weight: 310 kg


The outer diameter of the cylinder in this 20to log splitter is 100 mm and the diameter of the piston rod is 50 mm.

In relation to a 18 ton log splitter the outer diameter of the cylinder is at about 94-95 mm. The piston rod is 45 mm in diameter. The engine has on the 18 T Splitter 4.5 kW and at 20 T splitter 5.5 kW.

16 A socket combination with phase inverter

Guide rail made of brass

Here the "feed" be set.

Here the "push-back" can be adjusted 4x.

Steel plate with a height of 5 cm.

The upper link has a diameter of 26 mm.

7 cm Splitting wedge width

25 cm  Splitting wedge length

Please shorten the PTO shaft to required length.

We guarantee a serious carrying out. You have a full right of return.


⇒ Typing errors, misapprehensions and changes excepted.

top top
Parse Time: 0.866s