English Deutsch

Brushcutter / 4-stroke string trimmer UM25R with Honda engine GX25

Brushcutter / 4-stroke string trimmer UM25R with Honda engine GX25
Product no.: UM25R

300,00 EUR   19 % VAT incl.

Shipping inside Germany: 25,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up


Brushcutter / 4-stroke string trimmer UM25R with Honda engine GX25 Item is temporarily not available!
Large choice of new and used motor scythes, trimmers, backpack brushcutters.

This brushcutter is a Japanese product with high quality. We are the dealership, we get provided brushcutters directly from the producer.

It can be assumed that this company produces brushcutters for 80% of all Japanese manufacturers of brushcutters. We picked out the biggest and best known.

The producer manufactures trimmers for well-known distributors worldwide.

Some more informations.... We are the dealership in Germany! The motors are purchased directly from the Honda company in Japan. Thus, a low purchase price and the best quality is guaranteed. Thus we can offer a quality product to you at the best price-performance relation.

The engine will start super easy, no matter at what position the engine is situated and furthermore a 4-stroke-Hondaengine GX25 is quieter than a 2-stroke engine.

We sell only products, which we use ourself, which we offer in our retail store and which even have been extensively tested and found to be good.

The trimmer works generally with very low vibration - because the engine reaches only 7000 rpm at the maximum speed - a 2-stroke engine has min 12000 rpm (thus, it has higher vibration).

The fuel consumption is lower than the fuel consumption of a 2-stroke engine.

The device is suitable for full professional use.

A solid steel shaft transmits the force. It is borne in the tube seven times. This speaks for the absolute quality of this product.

A padded harness, a blade for grass cutting and a double line head are included in scope of delivery. It is a 3-toothed Brush blade or another grass blade available at surcharge. All grass cutting blades are in stock.

It is also possible to use steel blades from other manufacturers - Stihl blades with a central bore of 25.4 mm also fit.

The double line head has a M8x1.25 left female thread - You can use any commercial double line trimmer head.

A powerful super device at a Best Price!

The brush cutter is equipped with a round handle. So you can carry the brushcutter effortlessly and work long-term with it without cramping your arms.



We guarantee a serious carrying out. You have a full right of return.

Specification UM25R
• eco-friendly, smooth 1cylinder 4-stroke gasoline engine Honda GX25
• max. engine power: 0,81 kW/1,1 PS at 7000 rpm
• Fuel: gasoline (do not mix with oil)
• membrane-carburetor (for work at all sloping positions)
• round handle
• Easy Pull-System for 60 % less effort by starting
• sturdy centrifugal clutch for constant power transfer
• Driven by angular gear
• powerful and robust drive
• Hardened steel blade for tough jobs
• big tap-and-go line head
  (Dribble head / Dribbler = by dribbling on the ground the line is refreshed automatically)
• noise level 111 dB
• weight: 5.1 kg



Standard equipment
• padded harness
• Steel blade for grass cutting
• Double line head with 2,4 m line (The line is readjusted by dribbling while mowing)

The included 8-tooth cutting blade for grass cuts the grass with ease and produces a clean cut. The blade has the dimensions: 230 mm diameter, 3 mm thick, center hole 25.4 mm, cutting width 230 mm. It can be easily sharpened with an angle grinder.

For a heavier strain in jungle-like terrain, the thicket-knife (blade 3-star) is suitable. The blade has the dimensions: 230 mm diameter, 3 mm thick, center hole 25.4 mm, cutting width 230 mm. It can be easily sharpened with an angle grinder.
It is also possible to use steel blades from other manufacturers - Stihl blades with a central bore of 25.4 mm also fit.
A metal cover above the blade prevents that grass moves in between the blade and the gear.

A support/safety plate allows to have a uniform distance to the ground and this produces a clean cut appearance.

The tank is protected with a generously dimensioned holding frame.





The double line head / trimmer head is filled with a nylon line with a thickness of 2.4 mm. The line is readjusted by dribbling while mowing. The trimmer head can be take apart without tools. If the line is over, both lines have to be wound in direction of arrow. The trimmer head has a M8x1.25 left female thread and can be replaced with any equal nylon line of a commercial double line trimmer head. The cut circle is 470 mm.

 

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Recommended products:

Double shoulder harness / strap for trimmers

Double shoulder harness / strap for trimmers

55,00 EUR (19 % VAT incl. * Shipping information)
Engine oil 0.6 liters for 4-stroke engines

Engine oil 0.6 liters for 4-stroke engines

4,97 EUR (19 % VAT incl. * Shipping information)
Replacement mowing thread diameter 2.4 mm - Price per meter

Replacement mowing thread diameter 2.4 mm - Price per meter

0,36 EUR (19 % VAT incl. * Shipping information)
thicket-knife

thicket-knife

15,00 EUR (19 % VAT incl. * Shipping information)

Customers who bought this product also bought the following products:

Double shoulder harness / strap for trimmers

Double shoulder harness / strap for trimmers

55,00 EUR (19 % VAT incl. * Shipping information)
Engine oil 0.6 liters for 4-stroke engines

Engine oil 0.6 liters for 4-stroke engines

4,97 EUR (19 % VAT incl. * Shipping information)
Replacement mowing thread diameter 2.4 mm - Price per meter

Replacement mowing thread diameter 2.4 mm - Price per meter

0,36 EUR (19 % VAT incl. * Shipping information)
thicket-knife

thicket-knife

15,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 0.818s