flail mulcher TR600H Hydro
Meadows mower, Brushcutter
- Made in Italy -
Sorry, this pictures are from the TR600 with 3-speed gearwheel transmission.
This machine has wide AS tires.
The wheels are driven permanently, i.e. both wheels are constantly driven..
Steering levers are mounted on the handlebar. With these each wheel can be disengaged individually, so you can easily direct the machine to the right or the left.
Pull both steering levers at the same time, the traction drive is disengaged and the machine can be moved manually.
If you mow on slopes and take both hands off the spar, then slows down the machine immediately - ie the machine can never automatically roll down the slope. It brakes immediately.
A set of dual tires with spacer is available with a surcharge of 399.00 EUR!
The drive system is steplessly regulated forward and backward by hand lever, so you can infinitely adjust the running speed depending on grass height.
It is driven by a Briggs & Stratton Engine I / C 7,7 kW/10, 5 PS.
The flail mulcher has a blade brake. It is equipped with 28 Y-blades. These are solidly built and are easy to sharpen with the angle grinder.
The cutting height is infinitely adjustable via the skids.
A flail mower that is produced since 10 years. Made in Italy - for your information 70% of all garden equipment come from Italy.
Video:
We guarantee a serious carrying out. You have a full right of return.
Specification
• Engine: Briggs & Stratton I / C Engine 344 ccm
• Rated capacity: 5,6 kW/7,8 HP
• Maximum power: 7,7 kW/10,5 HP
• stepless Hydrostat
• Speed: 0 - 6 km / h
• Wheel and blade control from the handlebar
• has a blade brake
• adjustable handle bar
• steering brakes controlled by hand lever
• Cutting height adjustable from 20-80mm
• Cutting width: 60 cm
• Tires: 16-6.50x8
• Weight: 148 kg
