English Deutsch

Flail mower TR900H Hydro 12.5 hp Mulcher brush mower hand-guided

Flail mower TR900H Hydro 12.5 hp Mulcher brush mower hand-guided
Product no.: TR900H

5.400,00 EUR   19 % VAT incl.

Shipping inside Germany: 100,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up

2 years warranty + 1 year MGF parts warranty!

Flail mower TR900H Hydro 12.5 hp Mulcher brush mower hand-guided

Flail mower TR900H Hydro mulcher
Brush mower meadow mower
- Made in Italy -

This machine has double AS tires.

The wheels are driven permanently, i.e. both wheels are constantly driven.

However, steering brake levers are mounted on the handlebar. With these, each wheel can be disengaged individually, so you can easily steer the machine to the right or left.

If you pull both steering brake levers at the same time, the drive is disengaged and the machine can be pushed by hand.

If you mow on a slope and take both hands off the handlebar, the machine brakes immediately - i.e. the machine can never roll down the slope by itself.

The drive is steplessly forward and steplessly backward controlled by a hand lever, so you can continuously regulate the driving speed depending on the height of the grass.

It is powered by a Briggs & Stratton Motor I / C 9.2 kW / 12.5 PS.

The flail mower has a knife brake. It is equipped with 44 Y-knives. These are sturdy and can be easily sharpened with the angle grinder.

The cutting height is continuously adjusted by adjusting the skids.

A flail mower that we have been selling since 2007. Made in Italy - for your information 70% of all garden tools come from Italy.

Product video:

We guarantee a serious transaction - you have a full right of return.

Technical specifications
• Engine: Briggs & Stratton I / C engine
• Rated output: 6.8 kW / 9.1 PS
• Maximum output: 9.2 kW / 12.5 PS
• stepless hydrostat
• 22 pairs of Y-knives
• Travel speed: 0 - 6 km / h
• Wheel and knife control from the handlebar
• has a knife brake
• adjustable handlebar
• Steering brakes controllable via hand lever
• Cutting height continuously adjustable from 20-80mm
• Cutting width: 90 cm
• Twin tires: 4.00-8
• Weight: 198 kg

The handlebar can be adjusted in height and sideways in several stages.

(1) stepless cutting height adjustment

Oil reservoir for the hydrostat

(1) Lever for stepless forward and reverse travel
(2) Steering lever

(1) Clutch lever for travel drive
(2) Steering lever
(3) Clutch lever for mower

(1) The front wheels can be locked using this split pin.
The lock is suitable for use on slopes, so the machine does not drift sideways.
When working in straight terrain, the cotter pin can be pulled and both front wheels are fully movable.
This means that you can swivel the machine to the right and left without any problems.

(1) The grass or bushes are already pushed down by this rod.

(1) Y-knife suspended movably

Due to the high quality you have 2 years warranty and 1 year additional MGF warranty for private use.
MGF / Motorgeräte Fritzsch Warranty: Includes the free provision of spare parts upon detection of a material defect in the 3rd year, excluded from the MGF warranty are wearing parts, the remuneration of labor and other expenses.


⇒ Typing errors, misapprehensions and changes excepted.

top top
Parse Time: 0.811s