English Deutsch

Flail mulcher SLM125HL 1,25m light with a slight hammer flail mower for tractors compact tractors

Flail mulcher SLM125HL 1,25m light with a slight hammer flail mower for tractors compact tractors
Product no.: SLM125HL

910,00 EUR   19 % VAT incl.

Shipping inside Germany: 75,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)

2 years warranty + 1 year MGF parts warranty!


Flail mulcher SLM125HL 1,25m light with a slight hammer flail mower for tractors compact tractors Item is temporarily not available!

flail mulcher/flail mower SLM125HL
with freewheel

Including 1 bottle of gear oil + all lubrication points are pre-greased!

We sell this unit since 2005 and order from our Italian distributors always full truck loads, therefore our top price at top quality.

The small tractor should have a rear three-point hitch and KATI, a standard PTO 1 3/8 with 540rpm.

This flail mower is suitable due to its light weight for tractors from 19hp. At high grass it is safer to go with the 1st gear and a small group, then a small tractor is not overloaded.

The flail shaft is driven by two V-belts, whereby the tensioning device is easy to reach and adjust. At the front of mulcher prevent

galvanically coated pendulum lamellae the penetration of stones and other objects, so you have the security against stone impact.

The device conforms to the applicable safety standards and is CE - certified.

The mulcher is equipped with freewheel gear.
The PTO shaft is included as standard.

The flail mower is equipped with hardened steel cup knives, which are staggered around the shaft - cup knives make a clean cut. The blades have a long service life and can be easily sharpened with an angle grinder.

Steel cup knives

 

The bracket and the parking support are included as standard in the package.

The rear roller is equipped with a wiper, and thus self-cleaning of the entire length.

The steel housing is outside 4 mm thick. The inner part is made ​​of 3mm sheet steel.

The stone guard is fitted front and rear.

The cutting height is easily adjustable in 5 steps.

We guarantee a serious carrying out. You have a full right of return.

Specification
• 125 cm working width
• Drive speed 540 rpm
• gearbox with freewheel
• 42 hardened hammer flails
• Stone guard, front and rear
• Housing made of 4 mm steel plate
• for tractors from 19 hp
• bracket and parking support as standard
• Weight approx 160 kg

10 cm offset in the pose

The flail mower can be attached 10 cm displaced when displacing the holding triangles according to the tractor.

Rear roller lubricateable

two v-belt drive from the gearbox to the blade shaft

Flail shaft fully lubricateable

Slip-skid adjustable, rear roller adjustable 5x

Triangle holder left bolted, displacement 10cm



Bolts (22 mm diameter) outside displaced

Video:



With manual including parts list!





Directly available in our warehouse! All spare parts are also in stock!


 

ATTENTION!

Please shorten the PTO shaft to required length!

 


Due to the high quality you have 2 years warranty and 1 year additional MGF warranty for private use.
MGF / Motorgeräte Fritzsch Warranty: Includes the free provision of spare parts upon detection of a material defect in the 3rd year, excluded from the MGF warranty are wearing parts, the remuneration of labor and other expenses.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

This product is compatible with:

Flail knives blade Y-blade for flail mower (1 pair)

Flail knives blade Y-blade for flail mower (1 pair)

7,15 EUR (19 % VAT incl. * Shipping information)
Hammer flails flail blade knives for flail mowers

Hammer flails flail blade knives for flail mowers

7,99 EUR (19 % VAT incl. * Shipping information)

Customers who bought this product also bought the following products:

Threaded top link Kat1  CAT1 46 - 60 cm for small tractors

Threaded top link Kat1 CAT1 46 - 60 cm for small tractors

30,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 1.296s