English Deutsch

Flail mulcher SLM125H heavy hammer flail flail mower for small tractors

Flail mulcher SLM125H heavy hammer flail flail mower for small tractors
Product no.: SLM125Hneu-Oel

1.310,00 EUR   19 % VAT incl.

Shipping inside Germany: 120,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up

2 years warranty + 1 year MGF parts warranty!

Flail mulcher SLM125H heavy hammer flail flail mower for small tractors

Including 1 bottle of gear oil + all lubrication points are pre-greased!

We sell this unit since 2005 and order from our Italian distributors always full truck loads, therefore our top price at top quality.

The small tractor should have a rear three-point hitch and KATI, a standard PTO 1 3/8 with 540rpm.

Hammer flails

This flail mower is suitable due to its light weight for tractors from 20hp. At high grass it is safer to go with the 1st gear and a small group, then a small tractor is not overloaded.

The flail shaft is driven via 3 belts, wherein the tensioning device is easy to grasp and adjust. In the version with Y knives 2 V-belt are sufficient as drive, due to its high balance mass is tall grass, tree branches and bushes to 3cm thickness absolutely no problem. By hammers flails a better and clean cut is observed.

The transmission is strengthened and dimensioned correspondingly large.

Gear oil needs to be replenished.

At the front of mulcher prevent galvanically coated pendulum lamellae the penetration of stones and other objects, so you have the security against stone impact.

The device conforms to the applicable safety standards and is CE - certified.

The mulcher is equipped with freewheel gear. The PTO is included.

The flail mower is equipped with hammer-knives, which are staggered around the shaft. The blades have a long service life and can be easily sharpened with an angle grinder.

The steel housing is outside 6mm thick. The inner part is made ​​of 4mm sheet steel.

The bracket is included as standard in the package.

The rear roller is equipped with a wiper, and thus self-cleaning of the entire length.

The stone guard is fitted front and rear.

The cutting height is easily adjustable in 6 steps by skids. But also the rear roller can be adjusted in height. As Option 3 the cutting height can be adjusted by adjustment of the upper arm.

We guarantee a serious carrying out. You have a full right of return.

• 125cm working width
• Drive speed 540rpm
• gearbox with freewheel
• 20 hammer-flail blades
• Stone guard, front and rear
• Housing made of 6mm steel plate
• for tractors from 20hp
• bracket is standard
• Weight approx 230 kg

Roller and blade shaft greaseable

3x V-belt as drive from transmission to the blade shaft

Skids inside 4x adjustable

Rear roller adjustable 6-way

10 cm offset in the posture

The flail mower can be attached to the tractor offset by 10 cm if the holding triangles are offset accordingly.

bolts (diameter 22 mm) inward

6 mm material thickness

Roll diameter


With manual including parts list!

Directly available in our warehouse! All spare parts are also in stock!


Please shorten the PTO shaft to required length!

Danger! Please fill up oil before use!

Due to the high quality you have 2 years warranty and 1 year additional MGF warranty for private use.
MGF / Motorgeräte Fritzsch Warranty: Includes the free provision of spare parts upon detection of a material defect in the 3rd year, excluded from the MGF warranty are wearing parts, the remuneration of labor and other expenses.


⇒ Typing errors, misapprehensions and changes excepted.

top top

Customers who bought this product also bought the following products:

Rear return rotary tiller UMK105 with roll suitable for tractors

Rear return rotary tiller UMK105 with roll suitable for tractors

2 years warranty + 1 year MGF parts warranty!

2.050,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 0.802s