English Deutsch

front loader with bucket and actuating devices for self-assembly to tractors

front loader with bucket and actuating devices for self-assembly to tractors
Product no.: FR

2.850,00 EUR   19 % VAT incl.

Shipping inside Germany: 130,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up

front loader with bucket and actuating devices for self-assembly to tractors Item is temporarily not available!

The front loader is CE approved and has all safety labels, nameplate and all other warnings.

A manual is included.

The front loader has a risk assessment or certificate of conformity as required according to the Machinery Directive 2006/42EG.  

It corresponds to the special front loader standard DIN EN12525 agricultural machinery loaders security.

Think about your safety!!!

Our competitors sell untested front loaders, which were mostly manufactured in Asia.

None of these products complies with European safety standards:
• missing important safety parts in these products
• there is no manual

At Motorgeräte Fritzsch GmbH you will get safe, tested and accepted front loaders. These are 100% compliant with current European standards.

The front loaders correspond with the EU standard 12525 and have been tested!

In standard scope of delivery the following is included:

  • Front loader complete with all mounting hardware and mounting brackets including all hoses and a single-lever control valve
  • a pressure line and a tube for the return flow is connected to the control valve

The connection to existing hydraulic pump of the tractor you must make yourself.

The blade width is adapted for each type of tractor.

The following blade widths are in the range of products:

  • 110 cm for small tractors
  • 120 cm for small tractors
  • 126 cm for medium tractors
  • 150 cm for large tractors

Self-cultivation means:

The front loader is equipped with any console of a tractor. That means you have to adapt the front loader to your tractor yourself. The existing console parts have to be flexed away and new adapters and consoles have to be made and welded on by you. It is therefore a normal adjustment and locksmith work.

Here´s the front loader when mounted on a Kubota B1-16D.

We guarantee a serious carrying out. You have a full right of return.


We hereby declare that the product is designed for mounting in or on a machine.

The machine in which the above-mentioned part is to be installed, should not be put into operation until it was found that the machine complies with the requirements of the Machinery Directive.

Any damage arising therefrom is not chargeable by Motorgeräte Fritzsch GmbH. Motorgeräte Fritzsch GmbH disclaims any liability for damages, because we have no influence on installation, use and safety of the machine.

For Diesel Engines: As none of the major manufacturers give warranty / statutory warranty rights in the use of vegetable oil for diesel engines, we hereby join in this scheme.


⇒ Typing errors, misapprehensions and changes excepted.

top top
Parse Time: 1.107s