This rotary mower is powered by a 5.5 hp Briggs & Stratton engine.
The B62 has a continuously variable transmission.
Depending on grass height and grass density, you can choose the mowing speed continuously. This is a decisive advantage over the competitors' gearboxes.
You can pull it back slightly, without the gear moves with.
Furthermore, the B62 has a full freewheel - d. H. You can rotate it on the spot on its own axis without a resistance.
The working width is 62 cm.
The 3 knives are mounted on a strong steel disc by means of strong M10 screws.
The rotary mower blade is 80 mm long, 35 mm wide and 3 mm thick.
The spar can be adjusted by means of the adjustment lever for
Immediately fold the transport in the car forward.
(1) continuous adjustment of the handlebar (2) adjustment lever
This simple system makes it possible to adjust the height
of the Holmes infinitely adjust to each user.
Protection against falling rocks
This technical solution is very complex but also very durable, d. H. The V-belt to the mower disc is always taut and is switched via the clutch.
The V-belt for the drive is also always tense.
The traction drive is realized via the engagement and disengagement in the gearbox.
Elaborate technology - but little V-belt wear !!!
This device is a good alternative to the bar mower because it is simpler, longer lasting and has a very good cut quality.
The knife blades are mounted on a sturdy holder, so there are no bends and other deformations on contact with stones and other obstacles.
Why a rotary mower instead of a beam mower?
Look into agriculture. In 1950 bar mowers were used on tractors there. They have long since been replaced by rotary mowers. Low vibration on the spar, longer life, faster blade change, faster sharpening of the blades are the main advantages of the rotary mower. The knives fold over obstacles in the back.
Use the technology that has been used successfully in agriculture for decades.
Our device is more expensive but also better:
• Air tires 4.00x4 instead of hard rubber wheels
• continuously adjustable handlebar
• multiple cutting height adjustment from 20-70 mm
• permanently tensioned V-belts
• cone clutch
• Turning aid
• Rotor blades are mounted on an extra strong holder - not on the rotating disc.
We guarantee a serious transaction - you have full right of return.
Technical specifications
- Engine: 4.1 kW / 5.5 hp Briggs & Stratton engine
- Drive: stepless from 1.7 to 3.2 km / h
- 3 knives mounted on a strong steel disc
- Working width 62 cm
- 4.00x4 pneumatic wheels
- infinitely adjustable handlebar
- multiple cutting height adjustment of 20-70 mm
- Weight 85 kg
lowest cutting height setting
highest cutting height adjustment
By means of this lever, the cutting height can be adjusted 6-fold.
