English Deutsch

Compact tractor Kubota B1600 4WD, overhauled and repainted

Compact tractor Kubota B1600 4WD, overhauled and repainted
Product no.: B1600mA

5.400,00 EUR   19 % VAT incl.

Shipping inside Germany: 350,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)


Compact tractor Kubota B1600 4WD, overhauled and repainted

equipment:
• new battery
• new fan belt
• new radiator hoses
• new seat
• new air filter
• new diesel filter
• new oil filter
• new oil
• oil seals are replaced if necessary
• all filters are new
• new or good used tires

The following work was made:
• the tractor was completely taken apart
• Engine / transmission have been checked and repaired
• any defective part was replaced
• steering gear overhauled
• radiator checked

We can prove these works.


Our tractors are equipped according to the current EU safety standards!

Warranty - 1 year. Except on common wear parts, age and running time related wear is not a defect.
Slight paint damage or abrasion might have occurred owing to ocean shipment.

We guarantee a serious carrying out. You have a full right of return.

Specification

• Diesel Engine: Kubota D950 - 3 cylinders with 927 ccm
• Power: 21,5 PS/15,81 kW at 3000 rpm.
• clear width front wheel: 93 cm
• clear width rear wheel: 109 cm
• Wheelbase center to center: 139 cm
• Ground clearance: 24 cm
• Transmission: mechanical circuit group
• Number of gears: 12 forward and 4 reverse
• max. Speed: 13 km/h
• rotation of the PTO: clockwise
• PTO Speed​​: 540 - 860 - 1000 rpm.
• Diameter of the PTO: 1'' 3/8 - 6 G-parted
• agrarian tyres front: 5.00-12
• agrarian tyres rear: 8.3 - 22
• Dimensions (L x W x H): 330 x 109 x 215 cm
• Weight: 665 kg


Think about the safety of a standardized EU rollover bar


According to our current state of knowledge - all our competitors sell tractors without EU approved and accepted roll bars - this is a violation of law.

If these dealers offer rollover bars, it's not a design that conforms to the standard and is not allowed.

In the EU, tractors from 600 kg net weight without equipment must have a tested and by an european test institute accepted roll bar.

We have tested rollover bars with much financial effort.

The manufacture of of a roll bar will cost at least 500.00 euros, so we have to factor with this additional cost.

You're taking a security risk when you buy a tractor from 600 kg net weight without a rollover bar!

Delivered with hinged unpainted roll bar.

Additional option:

  •    completely painted roll bar surcharge 280 € (this must be communicated to us early enough when placing the order)


Our tractors are equipped with an approved EU rollover bar after the EU: 86 / 298/EWG standard (check the pictures).





Here is one of several test reports and inspection reports!!!

 



clear width













all bolts are new electroplated - new safety stickers



with mounted and functional safety switch for clutch



new or good used tires





new EU-seat and new direction indicators







new exhaust







Video:

tractor seat

250€


Terra tires 84x27/58x22 for 1500 €

Through the turf tires you have a high contact surface and thus protect the lawn.

Even in wet terrain and at road trips these tires are ideal.

We drill the respective hole pattern of your tractor type in the wheel rims. For that we need the exact measurements and images via email

and / or a template out of cardboard with the original hole pattern of your rims.

You can build the set of lawn-tires on your Iseki / Yanmar / Hako / Kubota / JohnDeere / Branson etc.

This is a complete set of front wheels and rear wheels.

With instruction manual:

3 assemblers work on the tractors daily.
Our masters working with the hour.

Kubota spare parts service secured for all tractors.

>> Look! <<

Regarding street legal

After converting the tractor on your own, you can get the DEKRA approval for 600.00 Euros by us. You must retrofitting the tractor on your own, the following must be upgraded: parking lights, brake lights and a hazard flasher. Or we provide a finished vehicle papers for 1200.00 Euros and have upgraded the tractor electrically. The vehicle is first registered on company Fritzsch and you only need to make the transfer at the admissions office.

If you want to get the licensing for your own tractor by us, then the tractor has to be presented here and must be technically accepted. You can also retrofitting the tractor on your own even electrically. To create the vehicle registration, we still need a clearance certificate from your tractor. A clearance is required which can cost about 500.00 to 800.00 Euros if you do not have one.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Customers who bought this product also bought the following products:

front loader with bucket and actuating devices for self-assembly to tractors

front loader with bucket and actuating devices for self-assembly to tractors

2.380,00 EUR (19 % VAT incl. * Shipping information)
Three-point linkage KAT1 for small tractors

Three-point linkage KAT1 for small tractors

99,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 0.591s