English Deutsch

Compact tractor Kubota B1600 4WD with front loader, overhauled and repainted

Compact tractor Kubota B1600 4WD with front loader, overhauled and repainted
Product no.: B1600FL

7.600,00 EUR   19 % VAT incl.

Shipping inside Germany: 400,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)


Compact tractor Kubota B1600 4WD with front loader, overhauled and repainted

Large choice of new and used tractors, e.g. mini tractors, small tractors 4WD Compact tractors / CUTs Kubota, Iseki and Yanmar, Vineyard tractors with front hydraulics, walk-behind tractors, two-wheel tractors, tractors and agricultural implements. We offer accessories, attachments and spare parts for compact tractors and garden tractors / mini tractor (e.g. snow blowers, engines, etc.)

equipment:

    • new battery
    • new fan belt
    • new radiator hoses
    • new seat
    • new air filter
    • new diesel filter
    • new oil filter
    • new oil
    • oil seals are replaced if necessary
    • all filters are new
    • new or good used tires

The following work was made:
• the tractor was completely taken apart
• Engine / transmission have been checked and repaired
• any defective part was replaced
• steering gear overhauled
• radiator checked

We can prove these works.


Our tractors are equipped according to the current EU safety standards!

Think about your safety!!!

Our competitors sell untested front loaders, which were mostly manufactured in Asia. None of these products complies with European safety standards:
• missing important safety parts in these products
• there is no manual
At Motorgeräte Fritzsch GmbH you will get safe, tested and accepted front loaders. These are 100% compliant with current European standards.

The front loaders correspond with the EU standard 12525 and have been tested!

Think about of the safety of a standardized EU rollover bar


According to our current state of knowledge - all our competitors sell tractors without EU approved and accepted roll bars - this is a violation of law.

If these dealers offer rollover bars, it"s not a design that conforms to the standard and is not allowed.

In the EU, tractors from 600 kg net weight without equipment must have a tested and by an european test institute accepted roll bar.

We have tested rollover bars with much financial effort.

The manufacture of of a roll bar will cost at least 650.00 euros, so we have to factor with this additional cost.

You"re taking a security risk when you buy a tractor from 600 kg dead weight without a rollover bar!

Delivered with hinged unpainted roll bar.

Additional options:

  • completely painted roll bar surcharge 280,00 euros (this must be communicated to us early enough when placing the order)
  • A floating position can be retrofitted for a surcharge.


Our tractors are equipped with an approved EU rollover bar after the EU: 86 / 298/EWG standard (check the pictures).





Here is one of several test reports and inspection reports!!!

Warranty - 1 year. Except on common wear parts, age and running time related wear is not a defect.
Slight paint damage or abrasion might have occurred owing to ocean shipment.

We guarantee a serious carrying out. You have a full right of return.

Specification

• Diesel Engine: Kubota D950 - 3 cylinders with 927 ccm
• Power: 21,5 PS/15,81 kW at 3000 rpm.
• clear width front wheel: 93 cm
• clear width rear wheel: 109 cm
• Wheelbase center to center: 139 cm
• Ground clearance: 24 cm
• Transmission: mechanical circuit group
• Number of gears: 12 forward and 4 reverse
• max. Speed: 13 km/h
• rotation of the PTO: clockwise
• PTO Speed​​: 540 - 860 - 1000 rpm.
• Diameter of the PTO: 1" 3/8 - 6 G-parted
• agrarian tyres front: 5.00-12
• agrarian tyres rear: 8.3 - 22
• Dimensions (L x W x H): 330 x 109 x 260 cm
• Weight: 665 kg
• Front loader 120 cm work width


Max payload of the front loader is 150kg, because of the risk of tipping over, respectively higher payload of up to 300kg in conjunction with rear weights on the tractor.



new EU-seat and new direction indicators

 bucket width 1,20 m

 new air filter



new safety stickers

tractor seat

250€

Terra tires 84x27/58x22 for 1500 €

Through the turf tires you have a high contact surface and thus protect the lawn.

Even in wet terrain and at road trips these tires are ideal.

We drill the respective hole pattern of your tractor type in the wheel rims. For that we need the exact measurements and images via email

and / or a template out of cardboard with the original hole pattern of your rims.

You can build the set of lawn-tires on your Iseki / Yanmar / Hako / Kubota / JohnDeere / Branson etc.

This is a complete set of front wheels and rear wheels.

The crocodile bucket / utility bucket / bucket with Control valve and hose set is optional instead of the default front loader bucket for an additional charge of 850 €.

Additional options at additional cost:

  • Floating position for the front loader

 

 

Rear weight front weight HG200 tractor weight Ballast weight for tractors Small tractors for 199 €

The empty barrel and straps are not included.

 

60 Liter Fass

200 Liter Fass

With german manual:



4 technicians work daily on the tractors.

Here you can see a video from the everyday life of our tractor workshop (not provided!).

Here you can see two videos from the everyday life of our welding shop (not provided!). 3 professional welders work daily on own productions and custom-made products according to customer orders / customer requests.




Disassembly and assembly of the front loader - uncoupled within 15 minutes - see for yourself !!!



Before disassembling the front loader, lower the front loader bucket to the ground.



The front loader is equipped with parking supports.
These parking supports can be infinitely adjusted depending on the terrain.



You need to extend the parking supports.



Loosen the bolts and disconnect the hydraulic hoses (since these are bayonet locks).



Drive the tractor back.



The front loader stops in the parking position.
Coupling is done in reverse order.



The uncoupling of the front loader takes about 15 minutes.



Put the bayonet locks together with the same numbers.



Here you can watch our video for mounting the front loader:




Kubota spare parts service, information material and operating instructions for tractors bought from us. Look for yourself! <<




Regarding street legal

After converting the tractor on your own, you can get the DEKRA approval for 600.00 Euros by us. You must retrofitting the tractor on your own, the following must be upgraded: parking lights, brake lights and a hazard flasher. Or we provide a finished vehicle papers for 1200.00 Euros and have upgraded the tractor electrically. The vehicle is first registered on company Fritzsch and you only need to make the transfer at the admissions office.

If you want to get the licensing for your own tractor by us, then the tractor has to be presented here and must be technically accepted. You can also retrofitting the tractor on your own even electrically. To create the vehicle registration, we still need a clearance certificate from your tractor. A clearance is required which can cost about 500.00 to 800.00 Euros if you do not have one.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Recommended products:

snow plow XXL professional snow bucket for tractor small tractor with front loader

snow plow XXL professional snow bucket for tractor small tractor with front loader

750,00 EUR (19 % VAT incl. * Shipping information)

This product is compatible with:

Log gripper complete package rotator tongs holder control valve hoses and adapterplate for installation on frontloader

Log gripper complete package rotator tongs holder control valve hoses and adapterplate for installation on frontloader

1.999,00 EUR (19 % VAT incl. * Shipping information)

Customers who bought this product also bought the following products:

Turf lawn tires set with rims for Kubota L1802 L2002 L2202 L1-18 L1-20 L1-22 B1600 B1702 B1902 B1-16 and B1-17

Turf lawn tires set with rims for Kubota L1802 L2002 L2202 L1-18 L1-20 L1-22 B1600 B1702 B1902 B1-16 and B1-17

1.500,00 EUR (19 % VAT incl. * Shipping information)
Rotary mower SM150 Mulcher with 3 mulching blades for tractors

Rotary mower SM150 Mulcher with 3 mulching blades for tractors

2 years warranty + 1 year MGF parts warranty!

770,00 EUR (19 % VAT incl. * Shipping information)
Rear-rotary tiller rotary cultivator BF125 for tractors

Rear-rotary tiller rotary cultivator BF125 for tractors

2 years warranty + 1 year MGF parts warranty!

890,00 EUR (19 % VAT incl. * Shipping information)
Ball-hitch ball head for trailer hitch tractors linkage drawbar

Ball-hitch ball head for trailer hitch tractors linkage drawbar

12,00 EUR (19 % VAT incl. * Shipping information)
Three-point linkage KAT1 for small tractors

Three-point linkage KAT1 for small tractors

99,00 EUR (19 % VAT incl. * Shipping information)
mounted half-turn plough / single-furrow plough PF27 for tractors

mounted half-turn plough / single-furrow plough PF27 for tractors

450,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 0.921s