English Deutsch

Compact tractor Kubota B1902 4WD used with new front loader

Compact tractor Kubota B1902 4WD used with new front loader
Product no.: B1902FL

10.300,00 EUR   19 % VAT incl.

Shipping inside Germany: 500,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up

available again from mid-April. We are happy to take your orders and reservations.


Compact tractor Kubota B1902 4WD used with new front loader Item is temporarily not available!

equipment:

  • new battery
  • new fan belt
  • new radiator hoses
  • new seat
  • new or good used tires
  • new diesel filter
  • new oil filter

The following work was made:
• the tractor was completely taken apart
• Engine / transmission have been checked and repaired
• any defective part was replaced
• steering gear overhauled
• radiator checked

We can prove these works.


Warranty - 1 year. Except on common wear parts, age and running time related wear is not a defect.

We guarantee a serious carrying out. You have a full right of return.

Specification

  • Diesel engine: Kubota D1102 - 3 cylinder with 1115 ccm
  • Power: 25,5 PS/18,8 kW at 3000 rpm.
  • clear width front wheel: 105 cm
  • clear width rear wheel: 115 cm
  • Wheelbase center to center: 148 cm
  • Ground clearance: 27 cm
  • Transmission: mechanical circuit group
  • Number of gears: 12 forward and 4 reverse
  • Speed: 0,08 - 13,92 km/h
  • rotation of the PTO: clockwise
  • PTO Speed: 540 - 860 - 1000 U/min.
  • Diameter of the PTO: 1" 3/8 - 6 G-parted
  • agrarian tyres front: 6.00 - 12
  • agrarian tyres rear: 8.3 - 22
  • Dimensions (L x B x H) (L x B x H): 330 x 120 x 215 cm
  • Weight with front loader: 950 kg
  • Front loader 120 cm work width, new

Think about your safety!!!
Our competitors sell untested front loaders, which were mostly manufactured in Asia. None of these products complies with European safety standards:
• missing important safety parts in these products
• there is no manual
At Motorgeräte Fritzsch GmbH you will get safe, tested and accepted front loaders. These are 100% compliant with current European standards.

The front loaders correspond with the EU standard 12525 and have been tested!

 

In the EU, tractors from 600 kg net weight without equipment must have a tested and by an european test institute accepted roll bar.

We have tested rollover bars with much financial effort.

The manufacture of of a roll bar will cost at least 650.00 euros, so we have to factor with this additional cost.

You"re taking a security risk when you buy a tractor from 600 kg dead weight without a rollover bar!

Delivered with hinged unpainted roll bar.



Additional options:

  • Painted roll bar in black for 250.00 euros (this must be communicated to us early enough when placing the order)
  • A floating position can be retrofitted for a surcharge.


Our tractors are equipped with an approved EU rollover bar after the EU: 86 / 298/EWG standard (check the pictures).

 

Here is one of several test reports and inspection reports!!!


shovel width 120 cm


Wheelbase center to center


FYI: The rear three-point hitch is not included in standard delivery.


With new EU approved and accepted seat, as well as new indicators.


new hoses


new air filter


new battery


new Oilfilter


new diesel filter


with new safety stickers

Shovel level 1.85 m

tractor seat

250€

The crocodile bucket / crocodile bucket / utility bucket / bucket with extra control valve and hose set is optional instead of the standard-front loader bucket for an additional charge of 900 €. The folding shovel with a euro intake is not possible.

 

Croco bucket / Multi-purpose bucket / Folding bucket  

With german manual:



4 technicians work daily on the tractors.

Here you can see a video from the everyday life of our tractor workshop (not provided!).

Here you can see two videos from the everyday life of our welding shop (not provided!). 3 professional welders work daily on own productions and custom-made products according to customer orders / customer requests.




Disassembly and assembly of the front loader - uncoupled within 15 minutes - see for yourself !!!



Before disassembling the front loader, lower the front loader bucket to the ground.



The front loader is equipped with parking supports.
These parking supports can be infinitely adjusted depending on the terrain.



You need to extend the parking supports.



Loosen the bolts and disconnect the hydraulic hoses (since these are bayonet locks).



Drive the tractor back.



The front loader stops in the parking position.
Coupling is done in reverse order.



The uncoupling of the front loader takes about 15 minutes.



Put the bayonet locks together with the same numbers.



Here you can watch our video for mounting the front loader:




Kubota spare parts service, information material and operating instructions for tractors bought from us. Look for yourself! <<




Regarding street legal

We provide a finished vehicle papers for 1670.00 Euros and have upgraded the tractor electrically. The vehicle is first registered on company Fritzsch and you only need to make the transfer at the admissions office.
Or after converting the tractor on your own, you can get the DEKRA approval for 600.00 Euros by us. You must retrofitting the tractor on your own, the following must be upgraded: CE headlights with parking lights, mirrors, horn, brake lights and a hazard flasher.

If you want to get the licensing for your own tractor by us, then the tractor has to be presented here and must be technically accepted. You can also retrofitting the tractor on your own even electrically. To create the vehicle registration, we still need a clearance certificate from your tractor. A clearance is required which can cost about 500.00 to 800.00 Euros if you do not have one.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

This product is compatible with:

Log gripper complete package rotator tongs holder control valve hoses and adapterplate for installation on frontloader

Log gripper complete package rotator tongs holder control valve hoses and adapterplate for installation on frontloader

2.750,00 EUR (19 % VAT incl. * Shipping information)

Customers who bought this product also bought the following products:

Woods mulcher SLM115GM Flail mulcher Forest mulcher Woods Flail mower heavy hammer flail mower with hydr. side shift for tractors

Woods mulcher SLM115GM Flail mulcher Forest mulcher Woods Flail mower heavy hammer flail mower with hydr. side shift for tractors

2 years warranty + 1 year MGF parts warranty!

1.350,00 EUR (19 % VAT incl. * Shipping information)
pallet forks fork carriage for front loader tractors compact tractors

pallet forks fork carriage for front loader tractors compact tractors

1.099,00 EUR (19 % VAT incl. * Shipping information)
Ball-hitch ball head for trailer hitch tractors linkage drawbar

Ball-hitch ball head for trailer hitch tractors linkage drawbar

50,00 EUR (19 % VAT incl. * Shipping information)
Rotary tiller / rotary cultivator for tractors BF115 115 cm

Rotary tiller / rotary cultivator for tractors BF115 115 cm

2 years warranty + 1 year MGF parts warranty!

1.060,00 EUR (19 % VAT incl. * Shipping information)
Flail mulcher SLM105 1,05m flail mower Y-knife for tractors with PTO shaft !!!

Flail mulcher SLM105 1,05m flail mower Y-knife for tractors with PTO shaft !!!

2 years warranty + 1 year MGF parts warranty!

1.060,00 EUR (19 % VAT incl. * Shipping information)
manure fork Hay fork front loading fork for front mounting on tractors

manure fork Hay fork front loading fork for front mounting on tractors

820,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 0.820s