English Deutsch

Compact tractor Kubota B7000 with 4WD new frontloader overhauled and repainted

Compact tractor Kubota B7000 with 4WD new frontloader overhauled and repainted
Product no.: B7000FL

7.300,00 EUR   19 % VAT incl.

Shipping inside Germany: 400,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up; due to Corona, processing times may take longer

Delivery delays due to CORONA!

Available again in mid-October!

Compact tractor Kubota B7000 with 4WD new frontloader overhauled and repainted Item is temporarily not available!


• new battery
• new fan belt
• new radiator hoses
• new seat
• new air filter
• new diesel filter
• new oil filter
• new oil
• oil seals are replaced if necessary
• all filters are new
• new or good used tires

The following work was made:
• the tractor was completely taken apart
• Engine / transmission have been checked and repaired
• any defective part was replaced
• steering gear overhauled
• radiator checked
• safety switch for clutch

We can prove these works.

Slight paint damage or abrasion might have occurred owing to ocean shipment.

Warranty - 1 year. Except on common wear parts, age and running time related wear is not a defect.

• Diesel Engine: Kubota Z650 - 2 cylinders with 640 ccm
• Power: 14 PS/10,3 kW at 3000 rpm.
• clear width front: 93 cm
• clear width rear: 107 cm
• Wheelbase center-center: 121 cm
• ground clearance: 24 cm
• Transmission: mechanical circuit group
• Number of gears: 6 forward and 2 reverse
• max. Speed: 13 km/h
• rotation of the PTO: clockwise
• PTO Speed: 540 - 860 - 1000 rpm.
• Diameter of the PTO: 1" 3/8 - 6 G-parted
• agrarian tyres front: 5.00-12
• agrarian tyres rear: 8 - 16
• Dimensions (L x W x H):
280 x 120 x 115 cm
• Weight: 790 kg
• frontloader with 110 cm 

Additional option:

  • A floating position can be retrofitted for a surcharge.

We supply this tractor with the seat shown below!

new EU-seat

clear width rear: 107 cm /
clear width front: 93 cm

Wheelbase Center to Center 121 cm

new felt seal

new or good used tires


The crocodile bucket / crocodile bucket / utility bucket / bucket with extra control valve and hose set is optional instead of the standard-front loader bucket for an additional charge of 900 €. The folding shovel with a euro intake is not possible.



Bracket frame HG200 for tractor weight Ballast weight for tractors Small tractors for 350 €

The empty barrel and straps are not included.


60 liters barrel

200 liters barrel


With instruction manual:

3 assemblers work on the tractors daily.
Our masters working with the hour.

Kubota spare parts service secured for all tractors.

>> Look! <<

Regarding street legal

After converting the tractor on your own, you can get the DEKRA approval for 600.00 Euros by us. You must retrofitting the tractor on your own, the following must be upgraded: parking lights, brake lights and a hazard flasher. Or we provide a finished vehicle papers for 1300.00 Euros and have upgraded the tractor electrically. The vehicle is first registered on company Fritzsch and you only need to make the transfer at the admissions office.

If you want to get the licensing for your own tractor by us, then the tractor has to be presented here and must be technically accepted. You can also retrofitting the tractor on your own even electrically. To create the vehicle registration, we still need a clearance certificate from your tractor. A clearance is required which can cost about 500.00 to 800.00 Euros if you do not have one.


Removal and installation of the front loader - disconnected within 15 minutes - look!

Before disassembling the front loader, the front loader should be lowered to the ground.

The loader is equipped with support legs.
These support legs can be infinitely adjusted according to the terrain.

You must extend the support legs.

Unscrew the bolts and disconnect the hydraulic hoses (they have bayonet locks)

Drive the tractor backwards.

The loader stay in the parking position.
Connecting is done in reverse order.

The disconnecting of the front loader takes about 15 minutes.

Connect the bayonet locks with the same numbers.

Here you can watch our video - installation of the front loader:


⇒ Typing errors, misapprehensions and changes excepted.

top top
Parse Time: 0.966s