English Deutsch

Compact tractor Kubota B7001 4WD with new front loader, overhauled and repainted

Compact tractor Kubota B7001 4WD with new front loader, overhauled and repainted
Product no.: B7001FL

6.900,00 EUR   19 % VAT incl.

Shipping inside Germany: 400,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up; Delivery time: 4-5 days after receipt of payment by freight forwarder

Compact tractor Kubota B7001 4WD with new front loader, overhauled and repainted

• new battery
• new fan belt
• new radiator hoses
• new seat
• new air filter
• new diesel filter
• new oil filter
• new oil
• oil seals are replaced if necessary
• all filters are new
• new or good used tires

The following work was made:
• the tractor was completely taken apart
• Engine / transmission have been checked and repaired
• any defective part was replaced
• steering gear overhauled
• radiator checked
• safety switch for clutch

We can prove these works.

Slight paint damage or abrasion might have occurred owing to ocean shipment.

• Diesel Engine: Kubota D750 L - 3 cylinders with 762 ccm
• Power: 16 PS/11,5 kW at 2600 rpm.
• PTO power: 13 PS
• clear width front: 93 cm
• clear width rear: 107 cm
• Wheelbase center-center: 121 cm
• ground clearance: 24 cm
• Transmission: mechanical circuit group
• Number of gears: 6 forward and 2 reverse
• max. Speed: 13 km/h
• rotation of the PTO: clockwise
• PTO Speed: 540 - 860 - 1000 rpm.
• Diameter of the PTO: 1" 3/8 - 6 G-parted
• agrarian tyres front: 5.00-12
• agrarian tyres rear: 8 - 16
• Dimensions (L x W x H): 310 x 115 x 116 cm
• Weight: 470 kg
• total weight: 790 kg 
• new front loader 110 cm

Think about your safety!!!
At Motorgeräte Fritzsch GmbH you will get safe, tested and accepted front loaders. These are 100% compliant with current European standards.

Our competitors sell untested front loaders, which were mostly manufactured in Asia. None of these products complies with European safety standards:
• missing important safety parts in these products
• there is no manual

Additional option:

     A floating position can be retrofitted for a surcharge.

Financing / Leasing for businesses possible - Please contact us!


We guarantee a serious carrying out. You have a full right of return.

A rear three point linkage is available for surcharge.

new or used good tires

Additional offers:

The B1200 is the successor of the B7001, where the rear three-point hitch is included as standard.

Compact tractor all-wheel Kubota B1200 completely overhauled and repainted with front loader for 6800 €

Compact tractor Kubota B1200 with all-wheel reconditioned and repainted for 4500 €

Terra tire 76x37 for 1500 €

The crocodile bucket / crocodile bucket / utility bucket / bucket with extra control valve and hose set is optional instead of the standard-front loader bucket for an additional charge of 900 €. The folding shovel with a euro intake is not possible.


Bracket frame HG200 for tractor weight Ballast weight for tractors Small tractors for 240 €

The empty barrel and straps are not included.


60 liters barrel

200 liters barrel

With german manual:

4 technicians work daily on the tractors.

Here you can see a video from the everyday life of our tractor workshop (not provided!).

Here you can see two videos from the everyday life of our welding shop (not provided!). 3 professional welders work daily on own productions and custom-made products according to customer orders / customer requests.

Disassembly and assembly of the front loader - uncoupled within 15 minutes - see for yourself !!!

Before disassembling the front loader, lower the front loader bucket to the ground.

The front loader is equipped with parking supports.
These parking supports can be infinitely adjusted depending on the terrain.

You need to extend the parking supports.

Loosen the bolts and disconnect the hydraulic hoses (since these are bayonet locks).

Drive the tractor back.

The front loader stops in the parking position.
Coupling is done in reverse order.

The uncoupling of the front loader takes about 15 minutes.

Put the bayonet locks together with the same numbers.

Here you can watch our video for mounting the front loader:

Kubota spare parts service, information material and operating instructions for tractors bought from us. Look for yourself! <<

Regarding street legal

After converting the tractor on your own, you can get the DEKRA approval for 600.00 Euros by us. You must retrofitting the tractor on your own, the following must be upgraded: parking lights, brake lights and a hazard flasher. Or we provide a finished vehicle papers for 1300.00 Euros and have upgraded the tractor electrically. The vehicle is first registered on company Fritzsch and you only need to make the transfer at the admissions office.

If you want to get the licensing for your own tractor by us, then the tractor has to be presented here and must be technically accepted. You can also retrofitting the tractor on your own even electrically. To create the vehicle registration, we still need a clearance certificate from your tractor. A clearance is required which can cost about 500.00 to 800.00 Euros if you do not have one.


⇒ Typing errors, misapprehensions and changes excepted.

top top

Customers who bought this product also bought the following products:

Tipping trough skip TM100V 100cm zinc coated transport container transport trough

Tipping trough skip TM100V 100cm zinc coated transport container transport trough

335,00 EUR (19 % VAT incl. * Shipping information)
Three-point linkage PTO KAT1 for small tractors

Three-point linkage PTO KAT1 for small tractors

120,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 0.740s