English Deutsch

Compact tractor Kubota L1802 4WD overhauled and repainted with new hydraulic snow plow 150 cm

Compact tractor Kubota L1802 4WD overhauled and repainted with new hydraulic snow plow 150 cm
Product no.: L1802+SS150

11.680,00 EUR   19 % VAT incl.

Shipping inside Germany: 500,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up


Compact tractor Kubota L1802 4WD overhauled and repainted with new hydraulic snow plow 150 cm

equipment:
• new battery
• new fan belt
• new radiator hoses
• new seat
• new air filter
• new diesel filter
• new oil filter
• new oil
• oil seals are replaced if necessary
• all filters are new
• new or good used tires
• Supplied with foldable roll bar.

The following work was made:
• the tractor was completely taken apart
• Engine / transmission have been checked and repaired
• any defective part was replaced
• steering gear overhauled
• radiator checked
• safety switch for clutch

We can prove these works.



Slight paint damage or abrasion might have occurred owing to ocean shipment.

Specification
• Diesel Engine: Kubota D1102 - 3 cylinders with 1115 ccm
• Power: 25,0 PS/18,4 kW at 3000 rpm.
• Bore and stroke: 76 x 82
• clear width front (outside / outside): 1100 mm
• clear width rear (outside / outside):  1200 mm
• Wheelbase center-center: 1500 mm
• ground clearance: 270 mm
• Transmission: mechanical circuit group
• Number of gears: 6 forward and 2 reverse
• Speed: 0,22 - 14,7 km/h
• rotation of the PTO: clockwise
• PTO Speed: 540 - 800 - 1000 - 1250 U/min.
• Diameter of the PTO: 1" 3/8 - 6 G-parted
• agrarian tyres front: 6.00-14
• agrarian tyres rear: 8.3-24
• Dimensions with snow plow (L x W x H): 250 x 120 x 250 cm
• Weight: 920 kg
• hydraulic snow plow 150 cm


Additional option:

  • Painted roll bar in black for 250.00 euros (this must be communicated to us early enough when placing the order)
  • A floating position can be retrofitted for a surcharge.


Financing / Leasing possible - Please contact us!

our Japanese distributors supplies spare parts with a delivery time of 14 days to 1 month. But you can be sure you get any spare part!

Here are some pictures from our supplier in Japan:






 

Kubota has sold 4 million tractors worldwide - So you still can get spare parts in 20 years!

We guarantee a serious carrying out. You have a full right of return.

Warranty - 1 year. Except on common wear parts, age and running time related wear is not a defect.

 Video:


The snow plow has a working width of 150 cm and a height of 60 cm.
The snow plow can also be supplied with a working width of 130cm

The snow plow is designed as a spring flap snow shield, that is if you drive into an obstacle, the shield folds away forward.

The snow plow can be pivoted hydraulically and lifted hydraulically. The pivoting cylinder, the control valve and hoses are included.

Infinitely adjustable sliding skid.
Stronger support frame to prevent warping the snow plow.

As standard, one vulkolan strip with a thickness of as much as 15 mm is mounted.



The valve has a floating position - so you can effectively plough.
Floating position means that the snow plow with its own weight slight without pressure on the ground, so it adapts every bump.

Bayonet locks for quick removal and installation of the snow plow.



Here you see the connection to the pressure line. The pressure line is cut open and an angle piece is connected. The pressure valve is equipped with a pressure transmission.



Plug-in bolts for quick removal and installation of the snow shield.





Think about of the safety of a standardized EU rollover bar

According to our current state of knowledge - all our competitors sell tractors without EU approved and accepted roll bars - this is a violation of law.

If these dealers offer rollover bars, it"s not a design that conforms to the standard and is not allowed.

In the EU, tractors from 600 kg net weight without equipment must have a tested and by an european test institute accepted roll bar.

We have tested rollover bars with much financial effort.

The manufacture of of a roll bar will cost at least 650.00 euros, so we have to factor with this additional cost.

You"re taking a security risk when you buy a tractor from 600 kg dead weight without a rollover bar!

Delivered with hinged unpainted roll bar.

Additional option:

  • completely painted roll bar surcharge 280.00 euros (this must be communicated to us early enough when placing the order)
  • Painted roll bar in matt black for 250.00 euros


Our tractors are equipped with an approved EU rollover bar after the EU: 86 / 298/EWG standard (check the pictures).





Here is one of several test reports and inspection reports!!!


 

With instruction manual:

3 assemblers work on the tractors daily.
Our masters working with the hour.

Kubota spare parts service secured for all tractors.

>> Look! <<

Regarding street legal

We provide a finished vehicle papers for 1670.00 Euros and have upgraded the tractor electrically. The vehicle is first registered on company Fritzsch and you only need to make the transfer at the admissions office.
Or after converting the tractor on your own, you can get the DEKRA approval for 600.00 Euros by us. You must retrofitting the tractor on your own, the following must be upgraded: CE headlights with parking lights, mirrors, horn, brake lights and a hazard flasher.

If you want to get the licensing for your own tractor by us, then the tractor has to be presented here and must be technically accepted. You can also retrofitting the tractor on your own even electrically. To create the vehicle registration, we still need a clearance certificate from your tractor. A clearance is required which can cost about 500.00 to 800.00 Euros if you do not have one.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

This product is compatible with:

Turf lawn tires set with rims for Kubota L1802 L2002 L2202 L1-18 L1-20 L1-22 B1600 B1702 B1902 B1-16 and B1-17

Turf lawn tires set with rims for Kubota L1802 L2002 L2202 L1-18 L1-20 L1-22 B1600 B1702 B1902 B1-16 and B1-17

2.400,00 EUR (19 % VAT incl. * Shipping information)

Shopping cart   >>

You do not have any products in your shopping cart yet.

Special offers   >>

Dozer blade, snow plow, hydraulic pusher blade PS120H for tractors

Dozer blade, snow plow, hydraulic pusher blade PS120H for tractors
Our previous price 850,00 EUR
Now only 750,00 EUR
you save 12 % / 100,00 EUR

19 % VAT incl. * Shipping information

Newsletter subscription

E-mail address:

Information

Gelistet bei TestIt.de

Parse Time: 0.752s