English Deutsch

Compact tractor Kubota L1802 4WD, overhauled and repainted

Compact tractor Kubota L1802 4WD, overhauled and repainted
Product no.: L1802

6.999,00 EUR   19 % VAT incl.

Shipping inside Germany: 350,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)


Compact tractor Kubota L1802 4WD, overhauled and repainted
 

equipment:
• new battery
• new fan belt
• new radiator hoses
• new seat
• new air filter
• new diesel filter
• new oil filter
• new oil
• oil seals are replaced if necessary
• all filters are new
• new or good used tires
• Supplied with foldable roll bar.

The following work was made:
• the tractor was completely taken apart
• Engine / transmission have been checked and repaired
• any defective part was replaced
• steering gear overhauled
• radiator checked
• safety switch for clutch

We can prove these works.


Our tractors are equipped according to the current EU safety standards!

Slight paint damage or abrasion might have occurred owing to ocean shipment.

Specification
• Diesel Engine: Kubota D1102 - 3 cylinders with 1115 ccm
• Power: 25,0 PS/18,4 kW at 2800 rpm.
• Bore and stroke: 76 x 82
• clear width front (outside / outside): 1100 mm
• clear width rear (outside / outside):  1200 mm
• Wheelbase center-center: 1500 mm
• ground clearance: 270 mm
• Transmission: mechanical circuit group
• Number of gears: 6 forward and 2 reverse
• Speed: 0,22 - 14,7 km/h
• rotation of the PTO: clockwise
• PTO Speed: 540 - 800 - 1000 - 1250 U/min.
• Diameter of the PTO: 1" 3/8 - 6 G-parted
• agrarian tyres front: 6.00-14
• agrarian tyres rear: 8.3-24
• Dimensions (L x W x H): 250 x 120 x 250 cm
• Weight: 850 kg

 

 

Video:

Financing / Leasing for businesses possible - Please contact us!



We guarantee a serious carrying out. You have a full right of return.

Warranty - 1 year. Except on common wear parts, age and running time related wear is not a defect.









Think about of the safety of a standardized EU rollover bar

According to our current state of knowledge - all our competitors sell tractors without EU approved and accepted roll bars - this is a violation of law.

If these dealers offer rollover bars, it"s not a design that conforms to the standard and is not allowed.

In the EU, tractors from 600 kg net weight without equipment must have a tested and by an european test institute accepted roll bar.

We have tested rollover bars with much financial effort.

The manufacture of of a roll bar will cost at least 650.00 euros, so we have to factor with this additional cost.

You"re taking a security risk when you buy a tractor from 600 kg dead weight without a rollover bar!

Delivered with hinged unpainted roll bar.

Additional option:

  •   completely painted roll bar surcharge 280.00 euros (this must be communicated to us early enough when placing the order)


Our tractors are equipped with an approved EU rollover bar after the EU: 86 / 298/EWG standard (check the pictures).





Here is one of several test reports and inspection reports!!!

 

 

With instruction manual:

3 assemblers work on the tractors daily.
Our masters working with the hour.

Kubota spare parts service secured for all tractors.

>> Look! <<

Regarding street legal

After converting the tractor on your own, you can get the DEKRA approval for 600.00 Euros by us. You must retrofitting the tractor on your own, the following must be upgraded: parking lights, brake lights and a hazard flasher. Or we provide a finished vehicle papers for 1300.00 Euros and have upgraded the tractor electrically. The vehicle is first registered on company Fritzsch and you only need to make the transfer at the admissions office.

If you want to get the licensing for your own tractor by us, then the tractor has to be presented here and must be technically accepted. You can also retrofitting the tractor on your own even electrically. To create the vehicle registration, we still need a clearance certificate from your tractor. A clearance is required which can cost about 500.00 to 800.00 Euros if you do not have one.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

This product is compatible with:

Turf lawn tires set with rims for Kubota L1802 L2002 L2202 L1-18 L1-20 L1-22 B1600 B1702 B1902 B1-16 and B1-17

Turf lawn tires set with rims for Kubota L1802 L2002 L2202 L1-18 L1-20 L1-22 B1600 B1702 B1902 B1-16 and B1-17

1.500,00 EUR (19 % VAT incl. * Shipping information)

Customers who bought this product also bought the following products:

Tipping trough skip TM120 transport container 120cm transport trough

Tipping trough skip TM120 transport container 120cm transport trough

285,00 EUR (19 % VAT incl. * Shipping information)
Three-point linkage KAT1 for small tractors

Three-point linkage KAT1 for small tractors

99,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 1.248s