English Deutsch

Compact tractor Kubota L2402 4WD with front loader and cab, overhauled

Compact tractor Kubota L2402 4WD with front loader and cab, overhauled
Product no.: L2402+FL+TK

14.000,00 EUR   19 % VAT incl.

Shipping inside Germany: 400,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)


Compact tractor Kubota L2402 4WD with front loader and cab, overhauled

equipment:

    • new battery
    • new fan belt
    • new radiator hoses
    • new seat
    • new air filter
    • new diesel filter
    • new oil filter
    • new oil
    • oil seals are replaced if necessary
    • all filters are new
    • new or good used tires
    • Supplied with foldable roll bar.

The following work was made:

    • the tractor was completely taken apart
    • Engine / transmission have been checked and repaired
    • any defective part was replaced
    • steering gear overhauled
    • radiator checked
    • safety switch for clutch
     

We can prove these works.

Our tractors are equipped according to the current EU safety standards!

Slight paint damage or abrasion might have occurred owing to ocean shipment.

The front loaders correspond with the EU standard 12525 and have been tested!

Warranty - 1 year. Except on common wear parts, age and running time related wear is not a defect.

We guarantee a serious carrying out. You have a full right of return.

Specification

    • Diesel Engine: Kubota D1402 - 3 cylinder with 1395 ccm
    • max. power: 31,4 PS/23,1 kW at 2800 U/min.
    • Bore and stroke: 85 x 82
    • clear width front (outside / outside): 1200 mm
    • clear width rear (outside / outside):  1330 mm
    • Wheelbase center-center: 1550 mm
    • ground clearance: 300 mm
    • Transmission: mechanical circuit group
    • Number of gears: 16 forward and 4 reverse
    • Speed: 0,22 - 14,7 km/h
    • rotation of the PTO: clockwise
    • PTO Speed: 540 - 800 - 1000 rpm.
    • Diameter of the PTO: 1" 3/8 - 6 G-parted
    • agrarian tyres front: 7.00-16
    • agrarian tyres rear: 11.2-24
    • Dimensions with cab (L x W x H): 330 x 150 x 180 cm
    • total weight: 1500 kg
    • new front loader with bucket width 150 cm 

Max payload of the front loader is 150kg, because of the risk of tipping over, respectively higher payload of up to 300kg in conjunction with rear weights on the tractor.

Included with the cab:

  • mirror set
  • Door stop
  • front and rear wipers
  • foldable rear glass
  • doors lockable
  • wiper fluid reservoir
  • hot water heating
  • toughened glass
  • interior light

  •  
    working width 150 cm - clear width front 120cm


    Clear height 220 cm


    Wiper and mirror set included


    wiper fluid reservoir


    heating


    foldable rear glass,
    roof with rain gutter


    locking for door



Additional charge:
  • foldable front glass
  • beacon
  • Front and rear lights

The price includes the installation of the cabin in our office, as well as the connection to the water cycle and the electrical connection.


If you want to mount the cabin itself, so we can offer you a special price!
(The cabin fits the following Kubota types: B1600 / B1702 / B1902 / L1802 / L2002 / L2202 / L2402) 

 

The crocodile bucket / crocodile bucket / utility bucket / bucket with extra control valve and hose set is optional instead of the standard front loader bucket for an additional charge of 850 €.

Additional options at additional cost:

  • Floating position for the front loader

 

 

Rear weight front weight HG200 tractor weight Ballast weight for tractors Small tractors for 199 €

The empty barrel and straps are not included.

 

60 liters barrel

200 liters barrel

Financing / Leasing for businesses possible - Please contact us!

our Japanese distributors supplies spare parts with a delivery time of 14 days to 1 month. But you can be sure you get any spare part!

Here are some pictures from our supplier in Japan:





Kubota has sold 4 million tractors worldwide - So you still can get spare parts in 20 years!

With german manual:



4 technicians work daily on the tractors.

Here you can see a video from the everyday life of our tractor workshop (not provided!).

Here you can see two videos from the everyday life of our welding shop (not provided!). 3 professional welders work daily on own productions and custom-made products according to customer orders / customer requests.




Disassembly and assembly of the front loader - uncoupled within 15 minutes - see for yourself !!!



Before disassembling the front loader, lower the front loader bucket to the ground.



The front loader is equipped with parking supports.
These parking supports can be infinitely adjusted depending on the terrain.



You need to extend the parking supports.



Loosen the bolts and disconnect the hydraulic hoses (since these are bayonet locks).



Drive the tractor back.



The front loader stops in the parking position.
Coupling is done in reverse order.



The uncoupling of the front loader takes about 15 minutes.



Put the bayonet locks together with the same numbers.



Here you can watch our video for mounting the front loader:




Kubota spare parts service, information material and operating instructions for tractors bought from us. Look for yourself! <<




Regarding street legal

After converting the tractor on your own, you can get the DEKRA approval for 600.00 Euros by us. You must retrofitting the tractor on your own, the following must be upgraded: parking lights, brake lights and a hazard flasher. Or we provide a finished vehicle papers for 1200.00 Euros and have upgraded the tractor electrically. The vehicle is first registered on company Fritzsch and you only need to make the transfer at the admissions office.

If you want to get the licensing for your own tractor by us, then the tractor has to be presented here and must be technically accepted. You can also retrofitting the tractor on your own even electrically. To create the vehicle registration, we still need a clearance certificate from your tractor. A clearance is required which can cost about 500.00 to 800.00 Euros if you do not have one.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Recommended products:

snow plow XXL professional snow bucket for tractor small tractor with front loader

snow plow XXL professional snow bucket for tractor small tractor with front loader

750,00 EUR (19 % VAT incl. * Shipping information)

This product is compatible with:

Log gripper complete package rotator tongs holder control valve hoses and adapterplate for installation on frontloader

Log gripper complete package rotator tongs holder control valve hoses and adapterplate for installation on frontloader

1.999,00 EUR (19 % VAT incl. * Shipping information)

Parse Time: 0.923s