English Deutsch

Compact tractor all-wheel Kubota B1200 completely overhauled and repainted with front loader

Compact tractor all-wheel Kubota B1200 completely overhauled and repainted with front loader
Product no.: B1200FL

6.800,00 EUR   19 % VAT incl.

Shipping inside Germany: 400,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)


Compact tractor all-wheel Kubota B1200 completely overhauled and repainted with front loader Item is temporarily not available!

The following equipment has this tractor:
• new battery
• new fan belt
• new radiator hoses as needed
• new seat
• new or good used tires
• new diesel filter
• new oil filter

The following works were carried out:
• the tractor has been completely disassembled
• Engine / transmission / front axle were disassembled, checked and repaired
• all defective parts have been replaced
• Steering box overhauled
• Cooler pressed down

We can prove this work without further ado.

Slight abrasions or paint damage due to maritime transport may be present.

Technical specifications
• Diesel engine: Kubota D750 L - 3 cylinders with 762 cc
• Power: 16 hp / 11.5 kW at 2600 rpm.
• Power of the PTO: 13 hp
• Front track: 93 cm
• Rear gauge: 107 cm
• Wheelbase: 121 cm
• Ground clearance: 24 cm
• Transmission: mechanical group switching
• Number of gears: 6 forward and 2 reverse gears
• Max. Speed: 13 km / h
• Direction of rotation of the PTO shaft: clockwise
• PTO speed: 540 - 860 - 1000 rpm.
• PTO shaft diameter: 1 "3/8 - 6 G parts
• Front tires: 5.00-12
• Rear tires: 8 - 14
• Dimensions (L x W x H): 230 x 110 x 124 cm
• Net weight: 505 kg without front loader
• Total weight: approx. 750 kg
• new front loader with 120 cm working width

Financing / leasing for traders possible - ask!

Think about your safety !!!
At Motorgeräte Fritzsch GmbH you get safe, tested and approved front loaders. These comply 100% with current European standards.

Our competitors sell unchecked front loaders, mostly made in Asia. None of these products comply with European safety standards:
• important safety parts are missing from these products
• there is no instruction manual
 

Kubota has sold about 4 million tractors worldwide - you will get spare parts in 20 years!

Additional option:

  • A floating position can be retrofitted for a surcharge.


1 year statutory warranty - except for usual wear parts.

We guarantee a serious transaction - you have full right of return.

Lifting height: 2 meters

A rear three-point hitch is available at an additional cost.

Axis version of the ball axis


1 -> new air filter

1 -> new seat 2 -> new turn signals

New tires or well-used tires

1-> new battery


1-> new tubes


1-> new diesel filter


1-> exhaust

1-> new fan v-belt

1-> all screws newly electroplated

1-> new transmission oil

1-> new engine oil


The crocodile bucket / crocodile bucket / utility bucket / bucket with extra control valve and hose set is optional instead of the standard-front loader bucket for an additional charge of 850 €.



 

 

 

 

Rear weight front weight HG200 tractor weight Ballast weight for tractors Small tractors for 199 €

The empty barrel and straps are not included.

 

60 Liter Fass

200 Liter Fass

  • Quick-change frame Frontloader Euro-receiver for 600 €

For an additional installation price, a Euronorm quick-change frame can be attached to each of our front loaders. Thus, you can buy all attachments on the open market. Of course always under the safety aspect of overload / stability etc.

With german manual:



4 technicians work daily on the tractors.

Here you can see a video from the everyday life of our tractor workshop (not provided!).

Here you can see two videos from the everyday life of our welding shop (not provided!). 3 professional welders work daily on own productions and custom-made products according to customer orders / customer requests.




Disassembly and assembly of the front loader - uncoupled within 15 minutes - see for yourself !!!



Before disassembling the front loader, lower the front loader bucket to the ground.



The front loader is equipped with parking supports.
These parking supports can be infinitely adjusted depending on the terrain.



You need to extend the parking supports.



Loosen the bolts and disconnect the hydraulic hoses (since these are bayonet locks).



Drive the tractor back.



The front loader stops in the parking position.
Coupling is done in reverse order.



The uncoupling of the front loader takes about 15 minutes.



Put the bayonet locks together with the same numbers.



Here you can watch our video for mounting the front loader:




Kubota spare parts service, information material and operating instructions for tractors bought from us. Look for yourself! <<




Regarding street legal

After converting the tractor on your own, you can get the DEKRA approval for 600.00 Euros by us. You must retrofitting the tractor on your own, the following must be upgraded: parking lights, brake lights and a hazard flasher. Or we provide a finished vehicle papers for 1300.00 Euros and have upgraded the tractor electrically. The vehicle is first registered on company Fritzsch and you only need to make the transfer at the admissions office.

If you want to get the licensing for your own tractor by us, then the tractor has to be presented here and must be technically accepted. You can also retrofitting the tractor on your own even electrically. To create the vehicle registration, we still need a clearance certificate from your tractor. A clearance is required which can cost about 500.00 to 800.00 Euros if you do not have one.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Recommended products:

Terra tire 76x37 Wide tire industrial tire Tire set 8-16 for all tractors Kubota B7001 B1400 B1500 B1402 B1502

Terra tire 76x37 Wide tire industrial tire Tire set 8-16 for all tractors Kubota B7001 B1400 B1500 B1402 B1502

1.500,00 EUR (19 % VAT incl. * Shipping information)

Customers who bought this product also bought the following products:

Hay tedder FM210 with windrowing, rotary tedder for tractors

Hay tedder FM210 with windrowing, rotary tedder for tractors


1.600,00 EUR (19 % VAT incl. * Shipping information)
Rotary mower HK100S 1m 100cm outrigger high grass mower 2 cardan shafts incl.

Rotary mower HK100S 1m 100cm outrigger high grass mower 2 cardan shafts incl.

1.150,00 EUR (19 % VAT incl. * Shipping information)
Three-point linkage KAT1 for small tractors

Three-point linkage KAT1 for small tractors

99,00 EUR (19 % VAT incl. * Shipping information)
Ball-hitch ball head for trailer hitch tractors linkage drawbar

Ball-hitch ball head for trailer hitch tractors linkage drawbar

12,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 1.381s