English Deutsch

Small Tractor Kubota B1702 4WD used completely overhauled and repainted

Small Tractor Kubota B1702 4WD used completely overhauled and repainted
Product no.: B1702

7.100,00 EUR   19 % VAT incl.

Shipping inside Germany: 450,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up


Small Tractor Kubota B1702 4WD used completely overhauled and repainted Item is temporarily not available!

Equipment:

  • new battery
  • new fan belt
  • new radiator hoses
  • new seat
  • new or good used tires
  • new diesel filter
  • new oil filter

The following work was made:
• the tractor was completely taken apart
• Engine / transmission have been checked and repaired
• any defective part was replaced
• steering gear overhauled
• radiator checked

We can prove these works.


Warranty - 1 year. Except on common wear parts, age and running time related wear is not a defect.

We guarantee a serious carrying out. You have a full right of return.

Specification

  • Diesel enginer: Kubota D950 - 3 cylinder with 927 ccm
  • Power: 21,5 PS/15,81 kW at 3000 rpm.
  • Bore and stroke: 75 x 70
  • clear width front wheel: 900 mm
  • clear width rear wheel:  1135 mm
  • Ground clearance: 240 mm
  • Transmission: mechanical circuit group
  • Number of gears: 12 forward and 4 reverse
  • Speed: 0,44 - 13,6 km/h vorwärts / 0,60 - 9,75 km/h rückwärts
  • rotation of the PTO: clockwise
  • PTO Speed: 540 - 860 - 1000 rpm.
  • Diameter of the PTO: 1" 3/8 - 6 G-parted
  • agrarian tyres front: 5.00-12
  • agrarian tyres rear: 8.3 - 22
  • Dimensions (L x B x H): 243 x 115 x 215 cm
  • Weight: 665 kg


Think about your safety!!!

In the EU, tractors from 600 kg net weight without equipment must have a tested and by an european test institute accepted roll bar.

We have tested rollover bars with much financial effort.

The manufacture of of a roll bar will cost at least 650.00 euros, so we have to factor with this additional cost.

You"re taking a security risk when you buy a tractor from 600 kg dead weight without a rollover bar!

Delivered with hinged unpainted roll bar.



Additional option:

  • Painted roll bar in black for 250.00 euros (this must be communicated to us early enough when placing the order)

Our tractors are equipped with an approved EU rollover bar after the EU: 86 / 298/EWG standard (check the pictures).

 

Here is one of several test reports and inspection reports!!!


For information: The rear three-point hitch and towbar is not included in the standard scope of delivery.


With new EU approved and accepted seat, as well as new indicators.


side gear shifting lever


new hoses


new battery


new diesel filter


with new safety stickers

 

tractor seat

250€

Terra tires 84x27 / 58x22 for 2150 €

Through the turf tires you have a high contact surface and thus protect the lawn.

Even in wet terrain and at road trips these tires are ideal.

We drill the respective hole pattern of your tractor type in the wheel rims. For that we need the exact measurements and images via email

and / or a template out of cardboard with the original hole pattern of your rims.

You can build the set of lawn-tires on your Iseki / Yanmar / Hako / Kubota / JohnDeere / Branson etc.

This is a complete set of front wheels and rear wheels.

With instruction manual:

3 assemblers work on the tractors daily.
Our masters working with the hour.

Kubota spare parts service secured for all tractors.

>> Look! <<

Regarding street legal

We provide a finished vehicle papers for 1670.00 Euros and have upgraded the tractor electrically. The vehicle is first registered on company Fritzsch and you only need to make the transfer at the admissions office.
Or after converting the tractor on your own, you can get the DEKRA approval for 600.00 Euros by us. You must retrofitting the tractor on your own, the following must be upgraded: CE headlights with parking lights, mirrors, horn, brake lights and a hazard flasher.

If you want to get the licensing for your own tractor by us, then the tractor has to be presented here and must be technically accepted. You can also retrofitting the tractor on your own even electrically. To create the vehicle registration, we still need a clearance certificate from your tractor. A clearance is required which can cost about 500.00 to 800.00 Euros if you do not have one.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Customers who bought this product also bought the following products:

Rotary tiller / rotary cultivator for tractors BF115 115 cm

Rotary tiller / rotary cultivator for tractors BF115 115 cm

2 years warranty + 1 year MGF parts warranty!

1.060,00 EUR (19 % VAT incl. * Shipping information)
Rear-rotary tiller rotary cultivator BF95 for tractors 95 cm

Rear-rotary tiller rotary cultivator BF95 for tractors 95 cm

2 years warranty + 1 year MGF parts warranty!

1.005,00 EUR (19 % VAT incl. * Shipping information)
pallet forks fork carriage for front loader tractors compact tractors

pallet forks fork carriage for front loader tractors compact tractors

1.099,00 EUR (19 % VAT incl. * Shipping information)
Tipping trough TM150H rear trough / skip with hydraulic tilt transport trough

Tipping trough TM150H rear trough / skip with hydraulic tilt transport trough

710,00 EUR (19 % VAT incl. * Shipping information)
Front loader with shovel for self-mounting on Kubota B6001 B7000 B7001 and L2402

Front loader with shovel for self-mounting on Kubota B6001 B7000 B7001 and L2402

2.850,00 EUR (19 % VAT incl. * Shipping information)
Ball-hitch ball head for trailer hitch tractors linkage drawbar

Ball-hitch ball head for trailer hitch tractors linkage drawbar

50,00 EUR (19 % VAT incl. * Shipping information)
Parse Time: 1.013s