Auger 360mm rear earth auger for Tractor rear attachment

The small tractor from 10PS should have a rear three-point hitch KATI and a standard PTO 540rpm clockwise.

An adjustment on Kat II is possible for a surcharge of 100 € (see pictures).

 For your information:
The ideal device for drilling holes etc. No fence pillars augers can drill into stone or rock.

Every year we sell about 200 tractors in Germany.

All Tractor Accessories are active used by our customers. Thus we have the best feedback regarding durability, quality, suitability, etc..

We buy only full trucks ex factory.

To the manufacturer, we can now report problems and obtain technical changes.

We are not an Internet agency, which has no idea how their products work. 

The PTO drives a large-sized gear.

(1) Transmission
(2) protective cover

The auger is secured by a shear bolt on the transmission. The shear bolt is a normal M12er screw.

If the drill is entangled to an obstacle, then the shear bolt breaks and the transmission can not be damaged. An easy and simple solution! 

(1) Transmission
(2) Scheer Screw - Screw normal M12er

View of the shear bolt protection cover

The Standard PTO is included. However, you can also buy a slip clutch for 89.00 euros.

But no one knows what triggers, the slip clutch or rather breaking the shear bolt. Actually, the shear bolt is completely sufficient!

The auger screw blade has the following dimensions:

The screw blade has a standard replaceable drill tip and replaceable cutter.

The following accessories are available:

• Auger screw blades with 150mm diameter
• Auger screw blades with 225mm diameter
• Auger screw blades with 300mm diameter
• replacement blades
• replacement Tip
• PTO shaft with slip clutch

We guarantee a serious carrying out. You have a full right of return.

Specifications

• Ideal for drilling fence pillar holes
• fits to rear three-point linkage KATI / Standard PTO 540U/min. clockwise
• including standard PTO
• including auger screw blade with 360mm diameter
• Bracket is 3x height-adjustable
• replaceable auger screw blades cutter and  tip
• Material thickness of drill: 3mm
• Dimensions earth auger: 170cm x 156cm
• weight: about 100kg

ATTENTION!
Please shorten the PTO shaft to required length.

An adjustment on Kat II is possible for a surcharge of 100 € (see pictures).