English Deutsch

Broadcast spreader Nordfarm PL180 for small tractors (seed, fertilizer, salt, grit)

Broadcast spreader Nordfarm PL180 for small tractors (seed, fertilizer, salt, grit)
Product no.: PL180

580,00 EUR   19 % VAT incl.

Shipping inside Germany: 85,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up


Broadcast spreader Nordfarm PL180 for small tractors (seed, fertilizer, salt, grit)

Rear-spreader Nordfarm PL180 for tractors/compact tractors from 8,0PS
Sand, salt, seed and fertilizer spreader
Made in Italy

This Nordfarm spreader is ideal for tractors / compact tractors from 8,0PS. 

The tractor / small tractor should have a rear three-point linkage KATI and a standard PTO with 540rpm.

The spreader is made by one of the largest spreader producers in Italy, including German manual and spreading chart.

The distribution system with side discharge openings of the hopper allows a large spreading accuracy, it promotes the same amount of grit on each fan shovel.The double lever system offers the option to spread on the right or left side but also on the whole width.

Due to the infinatly variable adjustment of the deflector plate the spreading width can be adjusted almost infinitely (from 60 cm to 16 m).

The hopper is made of very high quality plastic which does not break in cold weather. All other metal parts are powder coated steel. The lens is made of V2A stainless steel.

This spreader is especially recommended for the use of salt.

Specification

  • for tractors/mini tractors from  8,0 PS
  • hopper volume: 170 Liter
  • adjustable spreading width from 60 cm to 16 m
  • Spreading width adjustable via spreading direction limiter or spreading distance regulation
  • Dual infinitely adjustable spread rate (Fine and coarse adjustment)
  • 90 cm hopper diameter
  • weight: ca. 54 kg
  • CE-sign
  • Cover for 80 euro and protective screen optional
  • Supplied with PTO
  • Spreader unassembled, installation for an additional charge of 80 €

78cm hopper height to the bottom of the agitator finger

90cm hopper width

(1) Rubber stop, so the deflector plate can not vibrate
(2) The deflector plate is infinitely adjustable and thus regulate the spreading width infinitely.

The bolts for the lower link arm can be screwed inwards.

The PTO is included as standard in the package.
It must be shortened to the correct size by the customer if necessary.

(1) spreading-direction limiter
(2) spreading distance regulation
(3) spreading chart

(1) agitator (it crushed lumps and prevents the sticking of the spreading material) (2) agitator finger

solid aluminum part

spread rate regulation

(1) Metal gearbox
(2) lubricateable

The spreading vanes are 4x adjustable in angle.
Thus, the spreading width can be further varied.

hitch

A real bargain!

We guarantee a serious carrying out. You have a full right of return.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top
Parse Time: 0.618s