English Deutsch

Firewood processor JAPA 355ZE Hydro with PTO drive, electric motor and conveyor

Firewood processor JAPA 355ZE Hydro with PTO drive, electric motor and conveyor
Product no.: JAPA355PLUSTRE

Our previous price 9.400,00 EUR
Now only 9.300,00 EUR
you save 1 % / 100,00 EUR
  19 % VAT incl.

Shipping inside Germany: 400,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)


Firewood processor JAPA 355ZE Hydro with PTO drive, electric motor and conveyor

Large choice of new and used FIRE WOOD PROCESSORs, firewood automatic machines, Chain saw machines, Sawing and splitting machines, Cutter splitter, log splitters, woodworking machinery, log cutters, Firewood circular saws, Tilting circular saws, Tilting saws, Firewoodsaws.

This firewood processor is manufactured and sold in Scandinavia. A sophisticated product with high quality.

This machine is primarily for semi-professional use and professional use. The proportion of wood heaters in Scandinavia (in rural area) is about 80%.

Here are some pictures from the manufacturer...



Functional prinziple

The PTO shaft drives a powerful hydraulic pump, which drives a hydraulic engine. This hydraulic engine serves as drive for the chainsaw. The lubrication of the saw-chain happens via  the existing hydraulic oil tank. There is a plunger pump mounted on the chain saw. During lowering of the chain saw oil is pressed in the chain automatically. You push the sword of chainsaw down via the hand lever. After the sawn log of wood falls into the splitting shaft, you push the lever more and the lever start the splitter. It splits the log high speed. The splitting cylinder responds automatically by a Pressure Control - it splits slower in case of very hard wood and it splits faster in case of soft wood. The wood is pressed against an only 1.5 cm strong power saving, hardened and tempered splitting wedge. If you push the lever back, the conveyor belt is on and the trunk is fed up to the mechanical stop.

The PTO is not included as standart. The splitting pressure rises depending on demand but the splitting speed is reduced by this way.

The splitting force is at 7 tons, risable awhile (10 tons).

Up to 3 m long logs can be placed on the table. A large contact surface is achieved by the roller-bearing, extended contact surface - that means long logs can not tilt. The log is moved by conveyor belt. The conveyor belt is driven by a hydraulic engine. It is 2.30 m long and serves as an extended wood rest. The three plastic rollers protect the log against rolling off. In the case of twisted wood they can also be removed.

The length of the logs can infinitely be adjusted up to 60cm. You only need to adjust the stop accordingly.

The Firewood processor can easily be operated by one person.


(1) fully opened protective cover
(2) stop

The splitting wedge can be moved in steps up or down with a hand lever. Depending on wood thickness you can split 1-way, 2-way, 4-way, 5-way or 6-way.


(1) hand lever
(2) splitting wedge

This is the 5x splitting cross, wich is not included as standard. The splitting machine has a slit pressure of 7 tons. This seems not much for the layman, but it is entirely sufficient. Whether beech, oak, birch or spruce (whether with many or not many branches) - the machine splits 99% of wood easily.

A conveyor belt is included. The length is 3,80m and it is driven by hydraulic engine, thereby the machine works completely independent!! The conveyor belt can be folded to reduce the risk of tipping over and to reduce the headroom.


Here you see the full-hydraulic drive of the conveyor belt.


The conveyor belt is very wide with 20 cm.


A wide supply channel esodic to the feeding channel for a better timber drainage.


The conveyor can not be pivoted laterally. It can just be lifted and lowered using a hand crank.


(1) Safety switch - if the protective cover is open the entire hydraulic system is switched off.
(2) Plunger pump for chain lubrication


A lifting table/ log lifter or a wood trestle can be driven by the hydraulic connectors.


Firewood processor at transport position


On / off switch and emergency switch


32 Ampere Socket


Hand-saw-bow

We guarantee a serious carrying out. You have a full right of return.

Specification

Model JAPA355ZE
   Type of drive
   PTO / Elektric engine 7,5 kW
   Max. cutting diameter    35 cm
   Saw chain / Sword    325" 64 drive links / 15" Sword
   Adjustable Cutting Length    till 60 cm
   Output per hour depending
  on thickness of logs
   4 - 10 m³/hour
   Oil volume    33 Liters
   PTO speed    420 - 450 rpm.
   Required tractor    20 kW / 27 PS
   Weight with conveyor
   630 kg
   Dimensions (LxWxH) in mm
   at transport position
   2810 x 1280 x 2530 mm
   Dimensions (LxWxH) in mm
   at work position
   6650 x 1280 x 3240 mm

We buy only full truckloads. - The resupply has arrived!

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Shopping cart   >>

You do not have any products in your shopping cart yet.

Special offers   >>

Rotary mower SM180 Mulcher with 3 mulching blades for tractors

Rotary mower SM180 Mulcher with 3 mulching blades for tractors
Our previous price 1.070,00 EUR
Now only 999,00 EUR
you save 7 % / 71,00 EUR

19 % VAT incl. * Shipping information

Newsletter subscription

E-mail address:

Last viewed:

Firewood processor JAPA 355ZE Hydro with PTO drive, electric motor and conveyor

Firewood processor JAPA 355ZE Hydro with PTO drive, electric motor and conveyor
Our previous price 9.400,00 EUR
Now only 9.300,00 EUR
you save 1 % / 100,00 EUR
19 % VAT incl. * Shipping information
Features:
Implements
More information on your personal page

Information

Gelistet bei TestIt.de

Parse Time: 0.506s