English Deutsch

Firewood processor JAPA 385ZE Expert with PTO drive electric motor and conveyor

Firewood processor JAPA 385ZE Expert with PTO drive electric motor and conveyor
Product no.: JAPA385ZE-expert

Our previous price 12.800,00 EUR
Now only 12.500,00 EUR
you save 2 % / 300,00 EUR
  19 % VAT incl.

Shipping inside Germany: 400,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up; Delivery time: 4-5 days after receipt of payment by freight forwarder

Ask for your special price!

Firewood processor JAPA 385ZE Expert with PTO drive electric motor and conveyor Item is temporarily not available!

This firewood processor is manufactured and sold in Scandinavia. A sophisticated product with high quality.

This machine is primarily for semi-professional use and professional use. The proportion of wood heaters in Scandinavia (in rural area) is about 80%.

Here are some pictures from the manufacturer:


A demonstration at our house is possible after prior appointment by phone.

The Firewood processor can easily be operated by one person.

We guarantee a serious carrying out. You have a full right of return.



Model JAPA385ZE Expert
  Type of drive   PTO / Elektric engine 7,5 kW
   Max. cutting diameter    38 cm
   Saw chain
   3/8" / 1,5 / 57 drive links
   15" / 38cm
   Adjustable Cutting Length    till 55 cm
  Output per hour depending
  on thickness of logs
   4 - 10 m³/hour
   Oil volume    42 Liter
   PTO speed    420 - 450 U/min.
   Required tractor    20 kW / 27 PS
   Weight with conveyor    895 kg
   Dimensions (LxWxH) in mm
   at transport position
   2810 x 1280 x 2530 mm
  Dimensions (LxWxH) in mm
   at work position
   6650 x 1280 x 3240 mm

Functional prinziple

The PTO shaft drives a powerful hydraulic pump, which drives a hydraulic engine. The electric motor runs idle. This hydraulic engine serves as drive for the chainsaw. The lubrication of the saw-chain happens via an extra hydraulic oil tank. The flow rate can be adjusted via a valve on the top of the splitter. If you push the sword of chainsaw down via the hydraulic lever, the saw chain will start automatically. After the sawn log of wood falls into the splitting shaft, you push the lever slightly and the lever start the splitter. It splits the log high speed. The splitting cylinder responds automatically by a Pressure Control - it splits slower in case of very hard wood and it splits faster in case of soft wood. The wood is pressed against an only 1.5 cm strong power saving, hardened and tempered splitting wedge. If you push the lever back, the conveyor belt is on and the trunk is fed up to the mechanical stop.

If the firewood processor is powered by the electric motor, the PTO runs idle.

The PTO is not included as standart. The splitting pressure rises depending on demand but the splitting speed is reduced by this way.

The splitting force is at 8 tons, risable awhile (11 tons).

Up to 3 m long logs can be placed on the table. A large contact surface is achieved by the roller-bearing, extended contact surface - that means long logs can not tilt. The log is moved by conveyor belt. The conveyor belt is driven by a hydraulic engine. It is 2.30 m long and serves as an extended wood rest. The three plastic rollers protect the log against rolling off. In the case of twisted wood it can also be removed.

The length of the logs can infinitely be adjusted up to 55 cm. You only need to adjust the stop accordingly.

The splitting wedge can be moved in steps up or down with a hand lever. Depending on wood thickness you can split 1-way, 2-way, 4-way 5-way or 6-way.

Here you see a 6-splitting cross which is delivered as a surcharge. The splitting machine has a slit pressure of 8 tons. This seems not much for the layman. But in connection with the Easy-splitting cross it is entirely sufficient. Whether beech, oak, birch or spruce (whether with many or not many branches) - the machine splits 99% of wood easily.

A conveyor belt is included. The length is 4,20m and it is driven by hydraulic engine, thereby the machine works completely independent. The conveyor belt can be folded to reduce the risk of tipping over and to reduce the headroom. It can be pivoted laterally.

The conveyor belt is very wide with 30 cm.

Here you see the full-hydraulic drive of the conveyor belt.

A wide supply channel esodic to the feeding channel for a better timber drainage.

The conveyor is pivotable laterally to 3 positions up to 25 °.

Locking lever for pivoting the conveyor belt

Here, the volume of oil for the lubrication of the chain is infinitely variable.

(1) plunger pump for lubrication of the chain
(2) Oil level indicator

Here is the the oil tank. It is installed above the saw.

Here you can see the hand lever for manual up and down of the splitting wedge.

A lifting table/ log lifter or a wood trestle can be driven by the hydraulic connectors.

(1) Control lever to start the splitting process
(2) Safety stop lever
(3) hydraulic control lever to lower the sword and cutting the wood

Hydraulic wood stop
comes the wood trunk to the stop, the conveyor switches off automatically.

Financing / Leasing for traders available - Call for details.


⇒ Typing errors, misapprehensions and changes excepted.

top top

This product is compatible with:

Log lifter hydraulically and extendable firewood processor for JAPA 385

Log lifter hydraulically and extendable firewood processor for JAPA 385

1.999,00 EUR (19 % VAT incl. * Shipping information)

Shopping cart   >>

You do not have any products in your shopping cart yet.

Special offers   >>

Heated tractor cab for Yanmar GK200

Heated tractor cab for Yanmar GK200
Our previous price 3.800,00 EUR
Now only 2.600,00 EUR
you save 32 % / 1.200,00 EUR

19 % VAT incl. * Shipping information

Newsletter subscription

E-mail address:


Gelistet bei TestIt.de

Parse Time: 0.790s