Including 1 bottle of gear oil + all lubrication points are pre-greased!
Attention! Please fill up with oil before use!
We sell this unit since 2005 and order from our Italian distributors always full truck loads, therefore our top price at top quality.
The small tractor should have a rear three-point hitch and KATI, a standard PTO 1 3/8 with 540rpm.
Hammer flails
This flail mower is suitable due to its light weight for tractors from 18 PS. At high grass it is safer to go with the 1st gear and a small group, then a small tractor is not overloaded.
The flail shaft is driven via 3 belts, wherein the tensioning device is easy to grasp and adjust. In the version with Y knives 2 V-belt are sufficient as drive, due to its high balance mass is tall grass, tree branches and bushes to 3cm thickness absolutely no problem. By hammers flails a better and clean cut is observed.
The transmission is strengthened and dimensioned correspondingly large.
Gear oil needs to be replenished.
At the front of mulcher prevent galvanically coated pendulum lamellae the penetration of stones and other objects, so you have the security against stone impact.
The device conforms to the applicable safety standards and is CE - certified.
The mulcher is equipped with freewheel gear. The PTO is included.
The flail mower is equipped with hammer-knives, which are staggered around the shaft. The blades have a long service life and can be easily sharpened with an angle grinder.
The steel housing is outside 6 mm thick. The inner part is made of 4 mm sheet steel.
The bracket is included as standard in the package.
The rear roller is equipped with a wiper, and thus self-cleaning of the entire length.
The stone guard is fitted front and rear.
The cutting height is easily adjustable in 6 steps by skids. But also the rear roller can be adjusted in height. As Option 3 the cutting height can be adjusted by adjustment of the upper arm.
We guarantee a serious carrying out. You have a full right of return.
Specification
• 105 cm working width
• Drive speed 540 rpm.
• gearbox with freewheel
• 16 hammer-flail blades
• Stone guard, front and rear
• Housing made of 6 mm steel plate
• for tractors from 18PS
• bracket is standard
• Weight approx 225 kg
Roller and blade shaft greaseable
3x V-belt as drive from transmission to the blade shaft
Skids inside 4x adjustable
Rear roller adjustable 6-way
10 cm Versatz in der Haltung
Der Schlegelmäher kann 10 cm versetzt am Traktor angehängt werden, wenn man die Haltedreiecke entsprechend versetzt.
bolts (diameter 22 mm) inward
6 mm material thickness
Roll diameter
Video:
With manual including parts list!
Directly available in our warehouse! All spare parts are also in stock!
ATTENTION!
Please shorten the PTO shaft to required length.
