English Deutsch

Flail mulcher SLM105HL 1,05m light with light mallets flail mower for tractors compact tractors

Flail mulcher SLM105HL 1,05m light with light mallets flail mower for tractors compact tractors
Product no.: SLM105HLneu-Oel

820,00 EUR   16 % VAT incl.

Shipping inside Germany: 75,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up; Delivery time: 4-5 days after receipt of payment by freight forwarder

2 years warranty + 1 year MGF parts warranty!


Flail mulcher SLM105HL 1,05m light with light mallets flail mower for tractors compact tractors Item is temporarily not available!

Rear flail mower / flail mower SLM105HL with freewheel



Including 1 bottle of gear oil + all lubrication points are pre-greased!

Attention! Please fill up with oil before use!

Attention! Please fill up with oil before use!

We have been selling this device since 2005 and always purchase full trucks from our Italian wholesaler, hence our top price for top quality.

The small tractor should have a rear three-point linkage KATI and a clockwise standard PTO shaft with 540 rpm.

Due to its low weight, this flail mower is suitable for smaller tractors. To be on the safe side, use 1st gear and a small group on tall grass so that a small tractor will not be overloaded.

The flail shaft is driven by two V-belts, whereby the clamping device is easy to reach and adjust.

On the front of the mulcher, galvanized pendulum slats prevent stones and other objects from penetrating through - so you are protected from falling rocks.

The device complies with the applicable safety standards and is CE certified.

The mulcher is equipped with a freewheel gear. The PTO is included in the standard scope of delivery.

The flail mower is equipped with hardened steel cup knives, which are in staggered rows around the shaft - cup knives make a clean cut. The knives have a long service life and can easily be re-sharpened with the angle grinder.


Steel hammer mallet


The bracket and the parking support are included as standard in the scope of delivery. Since the rear roller is equipped with a scraper, it cleans itself over the entire length. The sheet steel housing is 4 mm thick on the outside and the inner part is made of 3 mm sheet steel. The stone guard is located at the front and rear. The cutting height can easily be adjusted in 5 levels.

We guarantee a serious transaction - you have a full right of return.

 

Technical specifications
• 105 cm working width
• Drive speed 540 rpm
• Gearbox with freewheel
• 18 hardened hammer flail knives
• Stone guard front and rear
• Housing made of 4 mm sheet steel
• Bracket and parking stand as standard
• Weight approx. 180 kg

Advice from practice:

Decisive for the use of an attachment are not only the number of horsepower of a tractor, but also the working speed, cutting height setting, working depth, etc.!

This means that even a smaller tractor can operate a larger attachment at low driving speeds.

We will of course be happy to answer any questions you may have.

 

10 cm offset in the posture

The flail mower can be attached to the tractor offset by 10 cm if the holding triangles are offset accordingly.

Trailing roller can be greased

2 V-belts as drive from the gearbox to the knife shaft

Flail shaft can be fully lubricated

Steplessly adjustable sanding skid, trailing roller adjustable in 5 positions

Bolts (diameter 22 mm) offset inwards



Video:



German operating instructions including parts list are included!





Available directly in our warehouse! All spare parts also in stock!


 



ACHTUNG!
Bitte kürzen Sie die Zapfwelle auf die entsprechende Länge ab!


Danger! Please fill up oil before use!


Due to the high quality you have 2 years warranty and 1 year additional MGF warranty for private use.
MGF / Motorgeräte Fritzsch Warranty: Includes the free provision of spare parts upon detection of a material defect in the 3rd year, excluded from the MGF warranty are wearing parts, the remuneration of labor and other expenses.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Customers who bought this product also bought the following products:

Tractor seat Seat shell Sheet seat shell with backrest for small tractors used reupholstered

Tractor seat Seat shell Sheet seat shell with backrest for small tractors used reupholstered

30,00 EUR (16 % VAT incl. * Shipping information)
Side mirrors round for Kubota tractors new D11cm

Side mirrors round for Kubota tractors new D11cm

10,00 EUR (16 % VAT incl. * Shipping information)
scraper for Snow plow blade 118cm Polyurethan rubber strip, rubber lip

scraper for Snow plow blade 118cm Polyurethan rubber strip, rubber lip

28,00 EUR (16 % VAT incl. * Shipping information)
trailer hitch combi coupling hitch for Kubota B6001 B7000 B7001 B1200 B1400 B1402 B1500 B1502

trailer hitch combi coupling hitch for Kubota B6001 B7000 B7001 B1200 B1400 B1402 B1500 B1502

150,00 EUR (16 % VAT incl. * Shipping information)
Parse Time: 0.656s