Including 1 bottle of gear oil + all lubrication points are pre-greased!
We sell this unit since 2005 and order from our Italian distributors always full truck loads, therefore our top price at top quality.
The tractor should have a rear three-point hitch KATI and KATII.
Hammer flails
This flail mower is suitable due to its light weight for tractors from 35 PS.
The deck is equipped with hydraulic side shift and can be moved infinitely 37cm to each side. The sliding guides are greasable. You can control the lateral displacement with your existing hydraulics on the tractor or reinstall an additional single-lever control valve on your tractor.
The flail shaft is driven via 3 belts, wherein the tensioning device is easy to grasp and adjust. Tall grass, tree branches and bushes to 3cm thickness are absolutely no problem. By hammers flails a very good and clean cut is observed.
As standard the heaviest and robostete gearbox is installed.
Gear oil needs to be replenished.
At the front of mulcher prevent galvanically coated pendulum lamellae the penetration of stones and other objects, so you have the security against stone impact.
The device conforms to the applicable safety standards and is CE - certified.
The mulcher is equipped with freewheel gear. The PTO is included.
The flail mower is equipped with hammer knives, which are staggered around the shaft. The blades have a long service life and can be easily sharpened with an angle grinder.
The steel housing is outside 6 mm thick. The inner part is made of 4 mm sheet steel.
The bracket and the parking support are included as standard in the package.
The rear roller is equipped with a wiper, and thus self-cleaning of the entire length.
The stone guard is fitted front and rear.
The cutting height is easily adjustable in 6 steps by skids. But also the rear roller can be adjusted in height. As Option 3 the cutting height can be adjusted by adjustment of the upper arm.
We guarantee a serious carrying out. You have a full right of return.
Specification
• 165 cm working width
• Drive speed 540 rpm.
• gearbox with freewheel
• 28 heavy hammer-flail blades with 800g weight
• Stone guard, front and rear
• Housing made of 6 mm steel plate
• for tractors from 35PS
• bracket and parking support as standard
• Weight approx 382 kg
Roller and blade shaft greaseable
3x V-belt as drive from transmission to the blade shaft
Skids inside 4x adjustable
Rear roller adjustable 6-way
bolts (diameter 22mm) inward
6mm material thickness
side shift left or right
Greasable slide
large-sized gear
Ball bearing rear roller with 12cm diameter
Video:
With manual including parts list!
Directly available in our warehouse! All spare parts are also in stock!
ATTENTION!
Please shorten the PTO shaft to required length.
