English Deutsch

Flail mulcher mower SLM160F with grass collector flail mower for tractors small farm tractors

Flail mulcher mower SLM160F with grass collector flail mower for tractors small farm tractors
Product no.: SLM160F

2.500,00 EUR   19 % VAT incl.

Shipping inside Germany: 200,00 EUR *     * Shipping information

Shipping time: immediately available from stock, since we have several stores in the vicinity, we ask for tel. Pre-registration for pick-up

2 years warranty + 1 year MGF parts warranty!


Flail mulcher mower SLM160F with grass collector flail mower for tractors small farm tractors

Rear Flail Mower SLM160F
Flail mower with freewheel

The small tractor should have a rear three-point hitch KAT0 or KATI and a standard PTO with 540rpm. clockwise.

This flail mower is also suitable for smaller tractors, provided you drive with the first gear at high grass, then the tractor is not overloaded.

The gearbox is equipped with freewheel. The standard PTO is included in the standard scope of delivery.

The flail mower is equipped with hardened steel beaker. The knives have a long service life and can be sharpened easily with the angle grinder.

The sheet steel housing is 4 mm thick on the outside.

The gearbox has a freewheel as standard, so the blade shaft can run out when the drive is switched off.

By means of 2 double-acting hydraulic cylinder, the tailgate can be opened and closed.

There is a hydraulic cylinder mounted on the right and left.

For this purpose, a double-acting control valve must be present or still attached to the tractor.

The 36 mounted steel cup knives guarantee a clean cut.

The two front support wheels are 2-way height adjustable. It is installed under the rear of a steel roller, which is not height adjustable.

The actual cutting height adjustment is infinitely variable via the adjustment of the upper link.

The standard scope of delivery includes the PTO, 2 hydraulic cylinders for the rear discharge and the hose set.

On the hose set a plug-in coupling / bayonet fitting size 3 (20.8 mm) is screwed.

Fill up gear oil!


We guarantee a serious transaction - you have full right of return.

Technical specifications

  • 160 cm working width
  • Drive speed 540 rpm.
  • Capacity 0.7m³
  • Gearbox with freewheel
  • 36 hardened steel cup knives
  • Stone guard front and back
  • Housing made of 4 mm sheet steel
  • Weight 540 kg
  • including PTO, 2 hydraulic cylinders for rear discharge and hose set

Note from practice:

Decisive for the use of an attachment are not only the horsepower of a tractor, but also the working speed, cutting height adjustment, working depth, etc.!

Thus, even a smaller tractor at low driving speed operate a larger attachment.

If you have any questions, we are at your disposal.

 



3 V-belts





2-way height-adjustable



WATCH OUT!
Please shorten the PTO shaft to the appropriate length.


Danger! Please fill up oil before use!


Due to the high quality you have 2 years warranty and 1 year additional MGF warranty for private use.
MGF / Motorgeräte Fritzsch Warranty: Includes the free provision of spare parts upon detection of a material defect in the 3rd year, excluded from the MGF warranty are wearing parts, the remuneration of labor and other expenses.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top

Recommended products:

Hammer flail cast iron hammer flail blade knife for flail mower flail mulcher

Hammer flail cast iron hammer flail blade knife for flail mower flail mulcher

8,50 EUR (19 % VAT incl. * Shipping information)
Flail knives blade Y-blade for flail mower (1 pair)

Flail knives blade Y-blade for flail mower (1 pair)

8,00 EUR (19 % VAT incl. * Shipping information)

Parse Time: 0.930s