English Deutsch

Flail mulcher mower SLM90F with grass collector flail mower for tractors compact tractors

Flail mulcher mower SLM90F with grass collector flail mower for tractors compact tractors
Product no.: SLM90F

1.700,00 EUR   19 % VAT incl.

Shipping inside Germany: 85,00 EUR *     * Shipping information

Shipping time: 4-5 Days from receipt of payment (except custom-made products)

2 years warranty + 1 year MGF parts warranty!


Flail mulcher mower SLM90F with grass collector flail mower for tractors compact tractors

Rear flail mower SLM90F
with grass collector

The small tractor should have a rear three-point hitch KAT0 and KATI, a standard PTO clockwise with 540rpm.

This flail mower is suitable for tractors from 15 PS. At high grass it is safer to go with the 1st gear, then the small tractor is not overloaded.

The mulcher is equipped with freewheel gear. The PTO is included.

The flail mower is equipped with hardened cup knives. The knives have a long service life and can be easily sharpened with an angle grinder.

The steel housing is 4mm thick outside.

The gearbox is fitted as standard with a freewheeling, thus the knife shaft run out when the drive is switched off.

The volume of the cut grass collector is 0.40 m³.

By means of a double acting hydraulic cylinder can be opened and closed the tailgate.

For this purpose, a double-acting control valve must be present on the tractor or be still attached.

The 20 mounted cup knives guarantee a clean cut.

The two front support wheels are not adjustable. But it is a steel roller installed at the rear that is two times height-adjustable.

The real cutting height is infinitely adjustable by adjusting the top link.

In standard scope of delivery, the PTO, the hydraulic cylinder for the rear discharge and hose set are included.

On the hose set a plug-in coupling / bayonet fitting size 3 (20.8 mm) is screwed.

Fill up gear oil!

We guarantee a serious carrying out. You have a full right of return.

Specification

  • 90 cm working width
  • Drive speed 540 rpm.
  • capacity 0,40m³
  • gearbox with freewheel
  • 20 hardened cup knives
  • Stone guard, front and rear
  • Housing made of 4 mm steel plate
  • for tractors from 15 PS
  • PTO, the hydraulic cylinder for the rear discharge and hose set are included
  • Weight 310 kg



The rubber lip prevents the escape of stones.




This double V-belt
is permanently tensioned.




Hydraulic container discharge
Container capacity 0.40 m³.






ATTENTION!
Please shorten the PTO shaft to required length.


Due to the high quality you have 2 years warranty and 1 year additional MGF warranty for private use.
MGF / Motorgeräte Fritzsch Warranty: Includes the free provision of spare parts upon detection of a material defect in the 3rd year, excluded from the MGF warranty are wearing parts, the remuneration of labor and other expenses.

 


⇒ Typing errors, misapprehensions and changes excepted.


top top
Parse Time: 0.892s