This tedder fits to the rear three-point linkage KATI and KATII. It is driven by a standard PTO shaft clockwise with 540rpm.
The working width is 210cm. The pure working width of the tine arms is 160cm.
As standard it has a windrowing device.
This Tedder / Windrower has a Comer gearbox and is a very solid.
Everything runs completely in an oil bath.
The PTO shaft with overload clutch is included.
The two pneumatic-tyred wheels ensure good contact surface.
The wheels are hung up movable and can be locked by means of split pin if necessary, eg. if you drive backwards to the garage or the shed.
We guarantee a serious carrying out. You have a full right of return.
Specification
- working width: 2,10 m
- min. Power: ab 15PS
- tine arms: 6
- Material thickness of tines: 8mm
- Tires: 13x5.00-6 pneumatic tires
- Weight: 180kg
- standard with windrowing device
- max. Speed: 4-8 km / h
- Dimensions in working position: 210 x 210 x 110 cm
Windrower in working position with windrowing device
rotatably mounted
windrowing device is adjustable
Supports
Lever for adjustment of the side arms
Video:
ATTENTION!
Please shorten the PTO shaft to required length.
