
This tedder fits to the rear three-point linkage KATI and is driven by a standard PTO shaft 1 3/8 clockwise with 540rpm.
The working width is 320cm.
As standard it has a windrowing device.
This Tedder / Windrower has a Comer gearbox and is a very solid.
Everything runs completely in an oil bath.
The 9 star arms can be plugged in the prefabricated holder for transport.
The PTO shaft with overload clutch is included.
The two pneumatic-tyred wheels ensure good contact surface.
The wheels are hung up movable and can be locked by means of split pin if necessary, eg. if you drive backwards to the garage or the shed.
We guarantee a serious carrying out. You have a full right of return.
Specification
- working width: 320 cm
- min. Power: ab 20 PS
- tine arms: 9
- Material thickness of tines: 9 mm
- Tires: 15x6.00-6 pneumatic tires
- Weight: 352 kg
- standard with windrowing device
- max. Speed: 15 km / h
- Capacity: about 6.25 ha / h

Windrower in working position with windrowing device


40cm distance from the mounting to the end of the tine arm

windrowing device is adjustable to 3 positions



(1) wheels pivotable
(2) by means of split pin locked
(3) wheels are 5-way adjustable

solid 4-square tube 100x40

(1) with support
(2) lower link bracket can be rotated



Comer-gearbox

Windrower in transport position



ATTENTION!
Please shorten the PTO shaft to required length.