Rear return rotary tiller UMK105 with roll suitable for tractors

This rotary hoe / tiller we are selling since 2005.

The rotary tiller can be attached to any small tractor.

The tractor should have a rear three-point linkage and KATI a standard PTO 540rpm. clockwise

The PTO is included.

The drive of the blade shaft happens via a oil bath lubricated shaft. The bearings of the blade shaft are always lubricateable from the outside

The device corresponds the current CE regulations, including attached safety sticker.

We guarantee a serious carrying out. You have a full right of return.

Specification

• 105 cm  working width
• 350 kg weight
• from 15 PS tractor power
• Outside dimension frame roll: 130 cm
• number of blades: 20
• Working width of tines to tines: 95 cm
• tiller box internal dimension: 105 cm
• External dimensions tiller box: 122 cm
• including PTO

This rotary cultivator has a reinforced gearbox and housing. This can be notice already at the higher weight.

The reverse rotary cultivator is a special type of the normal rotary tiller.

The auger runs opposite to the rotational direction of the tractor wheels.

The soil cut out by the blades is thrown against a screen, thereby stones or large remains of plants are separated from the fine soil and covered by the sieved soil. Thus we obtain a seedbed free of stones and large material.

The trailing crumbs roller presses against the ground and smoothes at the same time.

A reverse rotary cultivator helps to save time and optimally prepares the ground for growing vegetables before.

It can also be used efficiently in horticulture, in order to obtain a smooth and stone-free surface.

The return rotary tiller can still be moved about 10 cm. That if you screw the brackets loose you can move the cutter body and then screw it tight securely.

External dimensions tiller box: 122 cm

Outside dimension frame roll: 130 cm

20 tiller blades

lubricateable blade shaft

 ATTENTION!
Please shorten the PTO shaft to required length.