Rear wood chipper shredder R130T for tractors

The mini tractor should have at least 10 PS and a rear three point linkage KATI or KATII and a standard PTO 540rpm clockwise.

This wood chipper R130T is equipped with a hammer shredder unit and a cutting disc.

With the cutting disc, you can shred branches up to a thickness of 65 mm.

With the hammer shredder unit you can shred branches up to 30 mm in thickness, but also flowers, compost, shrubs, straw, Reed, styrofoam, tree bark, leaves, hedge cuttings, etc..

The 22 movable hammer-blades are mounted on a shaft, thus, these blades are folded back if there is an obstacles. This reduces wear.

The wood chipper safely survive an accidental throwing in of stones, wire and other unsuitable material for shreddering.

Power is transmitted via V-belt. The V-belt is permanently streched by a tension pulley.

The rate of wood chips can be regulated with the movable mesh grade.





The PTO with freewheel is included as standard.

We guarantee a serious carrying out. You have a full right of return.

Specification
• Driven by the PTO of the tractor
• Min. 10,0 PS
• 30 mm main hopper diameter
• 65 mm side hopper diameter
• 3m³/h wood flow rate
• 22 hammer blades
• 2 chipping blades
• Dimensions (LxWxH): 1157 x 768 x 1459 mm
• 81,5 kg

ATTENTION!
Please shorten the PTO shaft to required length.