Roller spreader KS100 for lawn and compact tractors spreader sand spreader fertilizer spreader salt spreader grit spreader

functional principle

A roller with welded studs is driven by wheel. The two roller parts keep the grit in motion.

Under the roller is a closure plate. This closure plate opens and closes steplessly the spreader slit, so the grit can fall out or not. The closure plate can be adjusted and fixed infinitely by a lever.

Each wheel drives a sheet metal roller. This is solved easily and power saving.

We guarantee a serious carrying out. You have a full right of return.

Specification

• container volume: 80 Liter
• PU-container
• spreading width: 100 cm
• working speed: 4-6 km/h
• spreader control adjustable by slider
• pneumatic tires 6.00-6
• dimensions (LxWxH):: 138 x 96 x 53 cm (outer dimension complete with drawbar)
• weight: 23,5 kg

The container capacity is 80 liters.

Agitating roller with metal studs

By means of the adjusting screw with scale, the spread rate be set accurately.

(1) discharge opening for the material to be spread
(2) open slide

slide closed

The spreader shafts are bolted to the respective wheel.

The opening width is 4cm inside and the bolt has a diameter of 10mm.
The distance drawbar to the ground in the horizontal state is 23cm.