Rotary harrow KRE130 130 cm rotary hoe for tractors

This rotary harrow can be connected to tractors with a standard PTO clockwise 1 3/8. It is attached to the rear three-point KAT1 or KAT2 of the tractor.

The PTO shaft is included!

The rotary hoe is suitable for tillage after plowing and sowing on loosened soils.

These power harrows offer a high crumbling power. The soil is smoothed across the entire width. This gives a nice flat ground.

The working depth is adjusted once by adjusting the top link, as well as on the adjustment of the rear roller.

We guarantee a serious carrying out. You have a full right of return.

Specification

• working width: 1.30 m
• max. working depth: 20 cm
• weight: 335 kg
• number of milling tines: 12
• height-adjustable trailing roller 

rear roller

protection bar

Lower link bracket - Infinitely adjustable

Prongs drive lubricateable

Adjustment of rear roller (height adjustment)

The bearings of the rear roller are lubricateable

The prongs are screwed.

We recommend a PTO shaft with slip clutch to use, see below for recommendations.

ATTENTION!
Please shorten the PTO shaft to required length.